High density COB, flip COB, COB small light-emitting surface

Brand: "TOYONIA" is Japan and Japan Kohden Corp. brand lighting products, covering industrial lighting systems, lighting applications automotive lighting, lamp manufacturers, LED light source. Toyo Kohden Corp., focused R & D LED photoelectric develop cutting-edge technology, promoting technological upgrading applications. To provide consumers with superior performance products. Its TOYONIA industrial lighting systems and core technology with independent Toyo photoelectric intellectual rights. Features: TOYONIA YOLL HR series COB light source can be matched with a small angle of reflective glass lens, dramatically lighting the center of the light intensity, reduce light scattering and reduce light loss. In Y3AE model as an example, Y3AE light-emitting surface diameter of only 6mm, (LESФ6mm), its maximum power output up to 20W, the second by matching small-angle optics, light angle can be controlled at 80 or less. Traditional light-emitting surface diameter 17mm (LES Ф15MM) light source, by matching the large size of the secondary optics, light angle can be controlled at about 150, 20W power output at the same time, the center of the light intensity at around 50%. TOYONIA HR series COB light source also has the following features: Application "NMS" technology, high reliability, high stability; optimum brightness and color consistency: a unified and clear beam: high impact, anti-extrusion physical strength: temperature and humidity weather HR series application "NMS" technology, has applied for patent protection in China. Instructions: 1. Please match the appropriate drive power, do not exceed the scope of use; 2, please use reasonable thermal structure, matching suitable for dissipating heat and thermal grease, to ensure that work-related COB light source within the recommended temperature range (rubber surface temperature ≤125 ℃, Tc≤80 ℃); 3, in the process of installing the application, do not COB light source at high temperature (≥180 ℃) or low (≤-40 ℃) environment; 4, the product substrate using heat fast material, please optimization cable welding process. Recommended point in the pre-selection of high-quality solder with low-power electric ferrochrome welding process; 5, not directly connected to input 220V high voltage current or COB light source when the drive power load; 6, do not squeeze COB external sources; 7 Please match the appropriate secondary optics, lighting effects help to improve; 8, please be stored (in particular have been unpacked product) at room temperature, dry environment. TOYONIA YOLL HR series COB lighting products are rigorously tested before leaving the factory, under normal operation, ease of use.