FRP axial fan T35-11

Product parameters Material: FRP Cooling: direct cooling Type: Axial fan Use: production certificate: CCC pressure: pressure pressure form: single-stage gas flow direction: axial-flow performance: Corrosion Product Details I. Overview (a) Technical performance: T35-11-type axial fan is the national organization committee to promote the use of an efficient low pressure fan, the machine low power consumption, low noise, and has excellent corrosion resistance and other characteristics. It can be used as industrial plants, machinery manufacturing, chemical industry, printing and dyeing, electroplating, pharmaceutical and other industries; theaters, hotels, office buildings, residential and other buildings. If wind shell removed, can also be used as a fan, but also in a longer exhaust duct, spaced installed in series, to increase the total pressure in the pipeline. (B) the fan type: T35 axial flow fan according to the size of the impeller diameter into NO2.8, NO3.15, NO3.55, NO4, NO4.5, NO5, NO5.6, NO6.3, NO7. 1, NO8, NO9, NO10, NO11.2 thirteen gauge, number of leaves for each gauge are both four. Leaves can be loaded into a 15 °, 20 °, 30 °, 35 ° five kinds of angles. Thus, since the size of each gauge blade mounting angle of the spindle rotating speed is different, the fan air pressure, air volume and the power consumption is not the same. Transmission: Motor selection at all levels, with the impeller directly connected, body shell made of a cylindrical shape, the direction of rotation is clockwise. Third, the maintenance of an axial fan, the fan should be carefully checked before installation is due to packaging, shipping and damage, deformation, can be repaired properly after installation. The installation should pay attention to check the associated portion of loose leaves and duct clearance should be uniform, not touching. 2, connecting the outlet of the weight of the pipeline should not be borne by the fan duct installation should additional support. 3, in the axial fan inlet side must be fitted with air filter set, and installed protective wires. 4, the fan base must naturally engage the ground plane can not be beat bolt force the connection to prevent deformation of the base. When installing the level of foot correction application base, padded in order to maintain its horizontal position, and then tighten the bolt. 5, the axial fan mounted on the ceiling allowed, after installation, a trial must first turn. 6, after a long unused fan, when re-use, you must first check the coupling part is solid and reliable, and after commissioning, before official use. 7, after the official fan operation should be checked once a year for loose screws, wires skin is damaged, it is repaired according to their specific circumstances. 8, always pay attention to the fan in operation without abnormal noise, vibration is increased, and timely inspection repair. Fourth, use: T35-11-type axial flow fan can be used in machinery, chemicals, printing and dyeing, electroplating, paper, food, medicine and other industries and theaters, hotels, offices, residential ventilation purposes