Smoke charring furnace is square charring furnace product updates

Smoke square charring charring furnace furnace three brother smoking updated product using carbonization carbonization furnace principle, the furnace heating stipends anoxic decomposition of combustible gas, tar and char. Furnace exhaust pipe connected to the top of the turn tar separator and fan, charring furnace interior can be ceiling-mounted push-pull of two, has a unique structure, the effective volume of large, advanced carbonization process, short cycle, high yield, environmental protection good, long life and other advantages. I plant the latest development of environmental protection can be produced in addition to smoke pot when the charring wood tar and other smoke by chemical and physical methods in addition to a one-time recovery management, significantly reduce emissions of smoke in the air, to prevent contamination! The new smoke-free environment in the original charring charring furnace increase based on the flue gas recovery furnace, flue gas recovery can be achieved after clean smoke-free, smoke can be recovered as light as liquefied petroleum gas, as a heat source charring, but also for heating, cook, but also for dryer use. Smoke charring furnace production capacity 0.8-10T 4-6 hours in a furnace, the furnace temperature 430-1200 ℃, carbonization volume 3-14 cubic meters, with motor 3KW, machine weight 10000kg new smoking charring furnace with one machine effect, can also be directly carbonized material can also be made after the first stick charring. Smoke charring charring charcoal stove with ordinary indigenous carbon compared with burning a long time, high carbon content, high heat, heat, ash small, smoke-free, tasteless, non-toxic and so on. Moisture 0.98% 83.28% carbon content of 3.68% ash burn time 200 minutes / kg calorific value 7.9 kcal / kg volatile combustion temperature of 880 ℃ 6.68%