Shenyang professional supply various series ring die wood pellet machine manufacturers GY

Sales Tel: 0371-64567686 Shenyang professional supply various series ring die wood pellet machine manufacturers GY margin work card ring mold wood pellet machine equipment configuration: 1, the body: the body is an independent rectangular column on which device enclosed bearing pink bucket seat and connected, powder hopper toward the outside of the body, under which is equipped with V-shaped chassis, the wide and flat ground, so the next to be installed, can be any place for indoor use. 2, particle production apparatus: a rotating drum set lying below the powder hopper, front and rear bearing seat, drive through the rack, as inverted rotation, front end surface of the bearing cap is movable, assembly and disassembly, as long as a spin Under a wing nut, bearing cap and the rotary drum to be pulled out, put both ends of the system has a convex side of the drum loop, insert bearing interior, so do not make the oil penetrate the powder and without bond plugged. 3, gearbox: the worm gear, ratio to 1:12, the box can store oil, to ensure good gear lubrication and no noise, there can be observed depending on the mirror box, observe the movement and storage capacity, the outer end of the worm, equipped with eccentric shaft, driven to reciprocate the rack. 4, screen Pinch: means rotating drum lined with steel pipe manufacturing, there is a long trough the middle to open the ends mesh into the trench, flower-shaped hand wheel will rotate the screen on the outer package rotating drum, handwheel gear shore, tightness can be adjusted. 5, the motor frame: a screw bolt jail, the motor is mounted on the iron on, when the rotation of the screw bolt, the motor will move up and down for adjusting the belt. Shenyang professional supply various series ring die wood pellet machine manufacturers GY