PPCS96-2 × 10 air box pulse bag filter

PPCS96-2 * 10 air box pulse bag filter air box pulse bag filter Details Model: PPCS96-2 * 10 air box pulse bag filter air volume (m3 / h) A> 100g / m3n : 120000 B≤100g / m3n: 134500 filtration velocity (m / min): 1.0-1.2 total filtration area (m2): 1920 net filter area (m2): 1824 dust collector chamber (unit): 20 Total number of bag ( Article): 1920 precipitator resistance (Pa): 1500-1700 export gas dust concentration (mg / m3n): <50 precipitator withstand negative pressure (Pa): 9000 cleaning air pressure (Pa) :( 4 -6) * 105 Air consumption (m3 standard /min):1.8(3.5) rigid impeller feeder, no power cinder valve: the feed opening 400 * 400 speed 22.5rpm screw conveyor gear motor power 2.6KW Specifications LS400 * 10.5m TY100-35.5-4 4kw 2 sets of gear motor insulation area (m2): 350 Equipment total (about value, not including insulation) (kg): 42000 I. Overview air box pulse bag filter, which combines Advantages sub-room cleaning and pulse jet dust collector and other various categories, to overcome the sub-room cleaning kinetic energy when strong enough, filtering and cleaning at the same time the shortcomings, and thus make use of baghouses increased flexibility, improved collection efficiency. Second, the characteristics 1, the removal efficiency of 99.9 or more, dust emissions can be controlled at 30mg / Nm3 or less. 2, can handle high concentrations of dust 100g / Nm3 or less. 3, advanced sealing measures, leakage factor of less than 2%. 4, advanced structural design, large filtration area per unit volume, the device is small. 5, cleaning unique and effective way to extend the life of the filter bag. 6, the key parts reliable quality and long service life. 7, stable performance, high degree of automation, simple routine maintenance. Third, the principle dusting process: dust gas through the gas inlet into the dust, the dust of larger particles directly into the hopper, a gas containing small particles through the bag, the dust is retained on the outer surface of the bag, and the gas is after purification into the atmosphere by the induced draft fan. Cleaning Process: With the filter working, attached to the outer surface of the dust bag growing, dust running resistance increases, the conversion of a filtration unit valve is closed, the filter unit stops working, cleaning air reverse enter filter unit, the outer surface of the blow off the dust bag, and then the changeover valve plate open, the filter unit re-work, cleaning the filter goes to the next unit. The entire cleaning process is alternating between each filter unit of. Phone: 18795459806