KL-A0502-157 high temperature reformer NOx converter

First, the technical parameters: temperature: 400 ° C permissible ambient humidity: <80% RH Warm-up time: 30 minutes power connection: 220V 50 / 60Hz sample gas pressure: 1.5 kg Features Input: about 750W sample gas: Absolute value to 120 l / h conversion factor NO2 → NO: 97% (new converter tube) Sample temperature: 5 to 80 ° C Maximum capacity: 300ppm NO 2 at 70l / h Dew point: <10 ° C transition temperature: 400 ° C Operating temperature: +5 to + 50 ° C Mechanical Installation: machine standard 19 "rack-mount storage and transport: -20 to + 70 ° C Body material: two shell using spray technology, life conversion tube: Conversion the life of the tube depends on the concentration of NO2 in the sample gas. For the estimated useful life of the converter tube as shown in Figure 7 depending on the concentration of NO2 in the sample gas. The following shows the measured values ??obtained in a laboratory environment, That kind of gas into the dry, in this case, the conversion rate of up to 97%. Depending on the application, the service life of the converter corresponding to the following chart will vary. If the conversion rate during operation less than 95 percent, then raise the transition temperature can be achieved by, for example, from 400 ° C to? high 425 ° C (if the temperature exceeds 450 ° C, it will be damage to the converter tube).