Single hanging point hoist winch routine maintenance and repair methods

Wanyuan Water Machinery Plant Tip: daily single hanging point winch hoist maintenance methods: If you often do not use the hoist winch, hoist winch should be parked in a dry room. Forced parked outside, should choose a flat ground and covered with wood. After the park covered with drop cloths. Before long-term storage, to be on the inside winch hoist maintenance, repair damaged parts, and its thoroughly clean and maintain good technical condition. In the parking lot of the arrangement and the arrangement should ensure that any one mechanical hoist winch and out are not affected by other machinery. Shall mechanical fuel control lever to idle position, each lever in neutral position. Custody of the motor. Let go of the hoist winch motor cooling water inside. Replace with new oil. The new oil is usually neutral, the engine will not corrode metal parts. ③ fill diesel fuel tank to prevent the fuel tank from rusting. If conditions permit should join a preservative. During winch hoist engine shutdown should start once a month, so that the winch hoist machinery used for short distances, so that all parts of the establishment of a new lubricating oil film to prevent rust. It should be noted: Before starting hoist winch should be filled cooling water, cooling water should be exhausted end. On the surface of the machine rust treatment. Before storing hoist winch, should the outer surface, as the hoist winch rust paint off the size of the area to determine whether to use way up painting or repainting with the whole approach to repair, winch hoist The working device, its method of corrosion of metal exposed at the buttering.