Dongguan bag company | bag factory in Dongguan | Dongguan chemical filter bags

Supply Dongguan bag companies bag factory in Dongguan, Dongguan chemical filter bags | Aoxing professional production of filter bags | liquid filter bags | filter bags Paint | Chemical filter bags | grease filter bags | paint filter bags | PP filter bag | PE filter bag | MO filter bags | filter bags plating | Oil filter bags | oil removal filter bags | suction filter bags | filter bags ink | seam filter bags Guangzhou Aoxing filtration equipment Limited - Contact: Fang Zhen Kun 15817170885 http://www.ax -filter.com that deep three-dimensional filter material, 100% pure fiber to acupuncture formed three-dimensional, highly fluffy three-dimensional depth, twists and turns of the filter layer. Which is characterized by loose fibrous tissue, high rate increased load capacity of impurities, the kinds of fiber material is of the double shut-off mode, the effective removal of solid and soft particles, ie larger particles of impurities trapped in the fiber surface, and subtle particles were captured in the deep filter, be sure to use the process will not damaged due to the pressure increase, and therefore has a high filtration efficiency, in addition to high temperature surface heat treatment, the application of instant sintering / pressing process, can effectively prevent the filter When the fiber by the liquid high-speed impact and loss, both to ensure no fibers from the filtrate contamination caused by the phenomenon, but also to avoid the traditional roll-over treatment caused pore blockage and reduced bag life, while pressure difference without affecting the flow rate. Material: polyester (PE), polypropylene (PP), nylon (MO) Filtration accuracy (micron um): 1,3,5,10,15,20,25,50,75,100,150,200 Operating Temperature (℃): polyester (PE) 130 (momentary 180), polypropylene (PO) 90 (instantaneous 110), nylon (MO) 180 filter bag fixed orifice ring material: stainless steel ring, galvanized steel ring, plastic ring (polyester / PP) production methods: five seam, full-fusion welding standard filter bag size: 1 Bag -Φ180 × 430mm (Φ7 × 17 inches) on the 2nd bags -Φ180 × 820mm (Φ7 × 32 inches) on the 3rd Bag - Φ106 × 230mm (Φ4 × 9 inches) 4 bags -Φ106 × 380mm (Φ4 × 15 inches) on the 5th bags -Φ152 × 510mm (Φ6 × 20 inches) in addition to standard products, the company also based on customer requirements for the production of liquid filter bags, air filter bag series. A warm welcome to inquire.