Gray metal sheet metal shears small cutting board machine

Foot pedal shears tension spring means sliding pivot fixed to the operating force by two thirds, part of the machine with a pressing device, high cutting quality, and light weight, easy to move, which is widely for metal sheet industry human material is not cut electricity cut manpower, reasonable structure, cut automatic reset, foot lightweight and comfortable, with a gauge and tread bars cut folding device, cut quality: cut together, straight edges, no edges, achieve precision shear effect. Saving effort, precision cutting, easy to operate, economical and practical, economical and practical models: JM36 Since foot shears are human-driven, so in use to note the following; [1], this machine can only 2mm material thickness for the clipboard at a width of cold-rolled, hot-rolled steel and aluminum shear 800mm to 1200mm below. 2, the machine prior to use, the components of the machine must be adjusted, and the moving parts as stringent checks. 3, the machine must be kept clean, in the painting and the sliding part must be coated with anti-rust oil. 4, cutting edge blade on the machine should be kept sharp, if found damaged or worn and blunt lag phenomenon, should be rubbing and exchange. 5, the machine moving parts should use clean, non-corrosive and debris objects, often lubricating agents, maintain a flexible machine. 6, in strict accordance with operating procedures to cut, do not overload the machine to withstand overload cut, in order to avoid damage to the machine parts or blades. 7, when the cut if there is an abnormal phenomenon, should immediately stop cutting, adjustment and maintenance. 8, in the cut sheet metal of different thickness, the upper and lower blade edge cutting blade gap should adjust, adjust the ratio of the gap is 1: 0.03 mm. For example: When the cut sheet thickness of 1 mm, the upper and lower edge required for the 0.03 mm gap.