The best quality at lower prices more map BZF warehouse wall vibrator warehouse wall vibrators Zhoukou

(1) silo wall vibrators usually after 2000 hours, the warehouse wall vibrator bearings should be cleaned and refueling. (2) the need to regularly check the warehouse wall vibrator vibration motor whether the damp, cold, rusty and grease deterioration and so on. (3) warehouse wall vibrator vibration motor using single row tapered roller bearings, axial clearance must be controlled between 0.30-0.35mm, clearance is too large should adjust, or cause the motor to sweep boring very easily burn out the motor . (4) warehouse wall vibrator vibration motor shaft and the bearing is moving with. (5) warehouse wall vibrator vibration motor when not in use, must be stored in a dry warehouse, the library does not use corrosive gases, vibration motor for the new store should be checked regularly vibrator warehouse wall, also known as anti-blocking devices, used to make silos, feed tank or hopper feed section of the inclined wall leakage of high-frequency vibration to prevent bagging materials within the warehouse, there tubular channels, warehouse wall sticky materials such as poor flow phenomena, in order to ensure that the material from the hopper, feed tank or hopper flowing smoothly. Warehouse wall vibrator has been widely used in coal, electricity, building materials, coal, mining, chemical, metallurgy, casting, light industry, food, pharmaceutical, food, transportation and other industries. SN anti-blocking system structure and working principle: vibration motor and base by a bolt tightly fixed to one. Since the base securely mounted in the silo wall, which constitutes the single particle orientation forced vibration systems. When SN warehouse wall vibrator, vibrating motor rotates at high speed on the silo wall will produce a periodic high-frequency vibration, the vibration due to the periodic anti-blocking device, on the one hand the material out of contact with the silo wall, eliminating material friction with the warehouse wall, on the other hand the material affected by alternating the speed and acceleration, in an unstable state, thus effectively overcome internal friction and materials gathered force in order to eliminate the relative stability of the material inside the silo between smooth discharge of the material from the hopper outlet