Tongde County warehouse wall vibrators Hongda vibration equipment has been certified warehouse wall vibrators Selection

(1) silo wall vibrators usually after 2000 hours, the warehouse wall vibrator bearings should be cleaned and refueling. (2) the need to regularly check the warehouse wall vibrator vibration motor whether the damp, cold, rusty and grease deterioration and so on. (3) warehouse wall vibrator vibration motor using single row tapered roller bearings, axial clearance must be controlled between 0.30-0.35mm, clearance is too large should adjust, or cause the motor to sweep boring very easily burn out the motor . (4) warehouse wall vibrator vibration motor shaft and the bearing is moving with. (5) warehouse wall vibrator vibration motor when not in use, must be stored in a dry warehouse, the library does not use corrosive gases, vibration motor for the new store should be regularly checked advantage electromagnetic vibrator warehouse wall is not involved in the motor drive only vibration motor around the bottom of the unit connected electromagnetic vibrator warehouse wall. Electromagnetic vibrator warehouse wall within two eccentric shafts adjustable exciting force generated by gearing. This type of electromagnetic vibrator warehouse wall uniform feeding and reliable operation, can be adapted to different types of materials. However, this type of electromagnetic vibrator warehouse wall, there are some problems: the motor requires a dedicated motor housing space; no vibration systems, the exciting force is transmitted directly to the frame and foundation, noise, the impact of large; when the tank load too heavy, around the start because of a forced connection is torn; electromagnetic vibrator warehouse wall shafts and gears material requirements, good sealing performance tank, after the gearbox in oil heat easy to fire. Electromagnetic vibrator warehouse wall with a compact, light weight, easy installation, energy consumption, etc. used widely in the country. While this type of electromagnetic vibrator warehouse wall noise, high vibration frequency, small amplitude, amplitude adjustment depending on the gap between the core and the armature, if adjusted properly, the core-coil easily burned. Because electromagnetic vibrator warehouse wall afraid of water and will produce sparks vibration, they are not easy for coal and other transportation; amplitude because of work produced during, throwing index, throwing small intensity, often stacking phenomenon, and the yield was greatly delivery restrictions