Tubular screw conveyor equipment Zhang cheap

Screw machine should not transfer perishable viscous, easy caking materials, because these materials at the time of delivery will be bonded to the spiral, and rotates without moving forward or hanging bearing material in the form of product plugs , leaving the screw machine is not working properly. Screw diameters from 200 mm to 500 mm, a total of five sizes, length from 4 m to 70 m, at intervals of 0.5 m of a file, when the selection standard nominal length, special needs can be further raised in the optional section. Press the screw conveyor drive is divided into two types: C1 Method - When screw conveyor length is less than 35m, single-ended drive. Method C2 - screw conveyor is greater than 35m, double-ended drive. Spiral machine in the middle hanging bearing divided into categories: M1- rolling bearing hanging, using 80,000 seals bearings, shaft cover another dust seal structure, commonly used in difficult fuel, no fuel or oil on the materials have polluted areas, seal effect, suspended long bearing life, transporting the material temperature ≤80 ℃ (When ordering, do not specify). M2- sliding hanging bearing, dustproof seals, used in the transportation of materials relatively high temperature (> 80 ℃), or transport liquid materials. Specifications Model 200,250,315,400,500 Contact: Zhang Lei. Tel 13781991368 screw machine