Shandong factory outlets can be customized cyclone

 Cyclone devices are a class of dust. In addition to Shen mechanism is to make the dust stream rotary motion by means of the centrifugal force dust down and trapped in the wall of separation from the gas stream, and then by means of gravity so that dust particles fall into the hopper. Ordinary cyclone by intake manifold, exhaust pipe, cylinder, cone and hopper components. Cyclone simple structure, easy to manufacture, install and maintain ease of management, equipment investment and operating costs are low, it has been widely used to separate solid and liquid particles from a gas stream or separating solid particles from the liquid. Under normal operating conditions, the centrifugal forces acting on the particles is from 5 to 2500 times gravity, so the cyclone efficiency is significantly higher than gravity settling chamber. In mechanical precipitators, cyclone dust collector is the most efficient one. It is suitable for the removal of non-adhesive and non-fibrous dust, mostly used to remove more than 5μm particle, particle multi-cyclone dust collector means parallel to 3μm also has a 80 to 85% removal efficiency. Selected high temperature, abrasion and corrosion of special metal or ceramic material constructed cyclone, can operate at temperatures up to 1000 ℃, pressure of 500 × 105Pa conditions. Consider cyclone pressure loss control from the technical, economic aspects is generally 500 ~ 2000Pa. Therefore, it belongs in effect filter, and can be used in high temperature flue gas purification, a dust collector is widely used, and more used in the boiler flue gas dust removal, multi-level and pre-dedusting dust. Its main drawback is the lower of fine dust particles (<5μm) removal efficiency.