Hongyuan Xinxiang simple and reliable operation of the production structure of electromagnetic feeder feeder

Uses and Features: GZ series of electromagnetic vibrating feeder is widely used in mining, metallurgy, coal, building materials, chemicals, electricity, food and other industries, for the massive, granular and powdered materials from silos or other storage uniform continuous feed device or to be subject to quantitative feed device. GZ series of electromagnetic vibrating feeder Main features: This series of electromagnetic vibrating feeder with small size, low noise, light weight, high frequency, low energy consumption, it can be used for automatic control of the process to achieve the production process automation. Stepless feeding capacity, continuous operation can be frequent start and at the rated voltage, the amplitude condition, easy installation and maintenance. GZ series of electromagnetic vibrating feeder is widely used in mining, metallurgy, coal, building materials, chemicals, electricity, food and other industries. GZ series of electromagnetic vibrating feeder main features: 1. Because you can instantaneously change and hoisting stream, so to quantity with high accuracy. 2. Small size, light weight, simple structure, easy installation, no moving parts without lubrication, easy maintenance, low operating costs. 3. Due to the use of electromagnetic vibrating feeder mechanical vibration resonance principle to learn, double mass in the low critical work near resonance, and thus consume less power. 4. Due to the trough of the material in the feeding process is continuously toss, according to a parabolic trajectory to jump forward movement, and therefore less wear and tear to the trough. 5. This series electric vibrator control equipment using thyristor half-wave rectifier circuit, so in the course can be easily adjusted to stepless thyristor opening angle by adjusting the quantity of the way, and can achieve the production process centralized control and automatic control. GZ series of electromagnetic vibrating feeder works: current electromagnetic vibrating feeder shaker solenoid is the result of a single-phase half-wave rectification, when the coil connected to the positive half-cycle current through the armature and the core of Inter have given rise to a pulsed electromagnetic force to attract each other, then the tank rearward movement of the exciter main spring is deformed to store a certain amount of potential energy, in the negative half cycle is no current through the coil, the electromagnetic force disappears, the main spring release energy , the armature and the core in the opposite direction from the tank is moved forward so that the electromagnetic vibrating feeder to the AC power source for reciprocating vibration frequency of 3,000 times per minute, because the bottom line of the plane FORCE tank has a certain angle, and therefore the material in the tank tracks along parabolic continuous forward motion. Rectifier voltage level, you can control the electromagnetic vibrating feeder feed speed. Feeder using thyristor rectifier power supply. To change the SCR conduction angle, you can control the output voltage level. Depending on the conditions, it is desirable to control the different signals SCR conduction angle size to achieve automatic quantitative feeding purposes.