Dongguan Bureau Ju CNC double planetary mixer

CNC mixer of the solder paste mixer is a set of reactions, mixing, kneading homogenized into one versatile and efficient products, according to stirring mode is subdivided into two double planetary three planet and its electrical control using computer control system , equipped with a video surveillance system. Widely used in battery paste, paste medicine, cosmetic paste, paste food, electronics and other paste body paste, stirring the slurry. This series solder paste mixer is on the beam, the plane seat, square column, lifting mechanism, lifts and straight track, the barrel, mixing bucket, vacuum pump, a buffer tank, transmission system, electric control cabinet and operation panel etc. 1. stirred tank: two-layer structure, the barrel body jacket, inside and outside the gall 304 # stainless steel, jacketed spoiler, bottom of the barrel jacket, barrel bottom pulley 4, the barrel body with a handle. Jacket baffle by turning the cooling water uniform cooling barrel materials, ensure that the material process temperature uniformity. Barrel interior surface and the flange face by turning, to ensure that the cylinder wall and throwing cage space within a smaller range, so that the barrel all the materials are thoroughly stirred. 2. stir cage: a double planetary mixer with two specially designed stainless steel precision casting curve modeling stir cage, rotating between the two regions staggered stir cage, in a double planetary drive, driven by both the two throwing cage with the carrier for the revolution at the same time as their rotation, so that the material is sufficiently stirred barrel, three planetary mixer with three stainless steel stir cage, the cage side stir stir stir plate and bottom plate is provided with a non-metallic spatula for mixing bucket side walls and bottom of the barrel scraping material. In the planetary gear system driven by three throwing cage either with the carrier for the revolution, but also for their rotation, so that the material is no dead zone barrel stir. Speed ??stirring temperature sensitive materials can be used for frequency control according to the temperature-sensitive use low speed, low sensitivity to temperature using a high speed to improve stirring efficiency. 3. the barrel: the barrel of 304 stainless steel, is a component of the sealing chamber is provided with the vacuum line and vacuum gauge, illumination window, window. 4. Transmission: planetary gear transmission principle, stir cage, and at the same time to achieve carrier revolution, but also for their rotation. Transmission inverter control revolution and rotation speed. 5. Vacuum system: mixing between the barrel and the barrel between the barrel and frame are made seal between the shaft and the rack design, dynamic seal mechanical seals, static seals with silicone rubber O-seal member. Vacuum pump rotary vane vacuum pump, so that the barrel material was stirred in a vacuum environment to achieve, to meet specific material mixing process requirements. 6. Lift system: the screw jacks, lifts, Vice composition linear guide, for conveying mixing bucket lift, easy mixing, loading and unloading. 7. Control System: stirring speed variable frequency control; mixing bucket with a thermocouple device rotates together with the carrier, the material used for barrel temperature control; mixing bucket positioning, rise and fall are the proximity switch control and a safety interlock logic control, with safety audible alarm. 8. Using a video system to facilitate monitoring of the operation or office.