SS Model Three-centrifuge

The machine uses three-foot structure, divided into base (need to fight foundation attachment) and no basis (no fixed foundations) in two forms. There are basic centrifuge base iron castings, no basis for the filler base centrifuge concrete filled. Machine brake using the brake pads manual braking mode. All material contact parts 304 stainless steel, acid and alkali corrosion. Conversion liner made of 4-6mm stainless steel, retaining liquid shell with 3mm stainless steel, sump plate in 2mm stainless steel. And material contact parts can also be used spray, and other corrosion-resistant manner. Pellet machine starts can start or drive start, the motor can ordinary motor and explosion-proof motor. Structural features 1, industrial centrifugal extractor are tilting three-foot overhang structure can effectively reduce the vibration caused by load unbalance feet inside the rotating hub and generated during operation. 2, the housing and cover made of high quality stainless steel, cage base chassis are cast iron materials, the outlet pipe at the bottom of the chassis. 3, the spindle of high quality steel heat treatment finishing. 4, transmission triangular tape drive, driven directly by the motor centrifugal type start off wheel, allows the machine to start slowly, and gradually achieve the design speed to ensure smooth operation of the machine. 5, the machine has a brake open arm, good braking performance, can quickly stop the machine.