Professional alternative HYDAC HYDAC filter 0500D020BNHC

Professional alternative HYDAC HYDAC 0500D020BN / HC hydraulic oil filters often contain particulate impurities, can cause wear of hydraulic components relative motion of the surface, slide valve sticking, throttle opening clogged, the system reliability greatly reduced. Install certain precision filter in the system is to ensure that by the material and structure filter, oil filter can be divided into network type, line-gap, paper filter type, sintered magnetic filter and oil filter, etc. . Press filter placed in different positions, but also can be divided into the suction filter, pressure filter and return filter, its filtering accuracy (filter out impurities in the particle size) is different, with thick filters, general filters, precision filter and special fine filters of four, they were able to filter out greater than 100μm, 10 ~ 100μm, 5 ~ 10μm and 1 ~ 5μm size of impurity URL: http: //www.xljlvye.com hydraulic oil filter: monolayer or multi-layer metal mesh and filter made of layers constituting the mesh and the number depending on conditions of use and purpose may be, concentric rate, to withstand pressure, straight is good, stainless steel, without any glitches, in order to achieve a perfect filtering effect. Hydraulic oil filter material: stainless steel wire mesh, sintered wire mesh, iron preparation network. There are glass fiber filter paper, synthetic paper, wood pulp paper. A single layer or multi-layer metal mesh and filter made of, used in lubricating oil. Fuel coarse filter, fine filter in the distillation, absorption, evaporation and filtration. Hydraulic oil filter: filter through the oil flow characteristics flow and pressure drop is an important parameter flow characteristics, shall ISO3968-91 standard test flow characteristics, to draw flow - pressure drop characteristic curve. At rated supply pressure, total pressure drop (filter housing and filter pressure drop and pressure drop) should normally be 0.2MPa or less. Hydraulic oil filter: filter strength should ISO2941-83 standard rupture - impact test. A sharp decline when damaged hydraulic oil filter differential pressure should be greater than a predetermined value. Hydraulic oil filter: Flow fatigue characteristics should ISO3724-90 standard fatigue test 100,000 cycles. Hydraulic oil filter: The hydraulic oil should test resistance test shall ISO2943-83 standard pressure flow endurance tests to verify the hydraulic oil filter compatibility. Website: http: //www.xljlvye.com hydraulic oil filter Features: Made of a single layer or multi-layer metal mesh and filter, mesh layers constituting the screen according to the different conditions of use and purpose may be, concentric rate, to withstand pressure, straight is good, stainless steel, without any glitches, to ensure long service life.