Kun-yuan Yangzhou automatic (semi-automatic) R & D ceramic particles foam insulation board

Ceramic concrete hollow block is ceramic coarse aggregate, sand pottery plus other industrial waste as fine aggregate, cement as cementing material, by mechanical mixing, molding machinery, The Nature Conservancy made. Using ceramic hollow block as wall materials, can reduce labor intensity, labor and material, and the paint is not hollowing, difficult to produce cracks. Sound and heat insulation performance, easy decoration, can nail directly on the wall or expansion screws, no less wooden anvil, etc., and firmly high. It is ideal for energy-efficient buildings from thermal insulation wall materials can create significant economic and social benefits for the construction units. [1] The ceramic blocks and aerated concrete blocks are lightweight aggregate block; ceramic blocks are hollow, aerated concrete block is solid; aerated concrete block masonry thermal conductivity than ceramic block thermal conductivity is much smaller. Ceramsite concrete hollow block wall insulation how to do that using polystyrene foam board (EPS) or extruded polystyrene panel (XPS) insulation material for the basic requirements ● facades heat transfer coefficient and polystyrene board thickness selection ● side window insulation window and door openings should make the appropriate heat treatment (such as stick thin polystyrene board, polystyrene particles or wipe slurry, etc.). Sill plates shall comply with the requirements of safe use. Should be strictly in accordance with the design requirements of the construction. ● joints and decorative sewing production plant products have corresponding maximum spacing of expansion joints, expansion joints should coordinate the specific location and decorative seams with architects. ● coupling safety accounting