FRP lighting tile transparency

Ming source lighting shoe mounting using antiseptic 1. Mingyuan lighting tile pilot hole before securing the required pore size must be greater than 50% the diameter of the screws, in order to avoid internal stresses generated by thermal expansion and contraction bursting lighting watts. 2. That the source of lighting tile using aluminum fasteners fixed waveform lighting watts using lighting tile brackets and self-tapping screw connections fixed, call sealant. Lighting tile position generally set at mid-span. 3. That the source of lighting tile and steel longitudinal lap at a minimum there must be overlap of 200mm and paste placed two water stop. 4. That the source of lighting tile with self-tapping screw connection, must have cover. Hot and cold deformation of large solar panels, easy to be self-tapping screws cut broken, so sun-playing self-tapping screws office should open a larger hole. When installing lighting board lighting board to consider scalability. 5. When the source of lighting tile fixing, you must use well water pan gasket, so that between the screw and the plate between the light in order to waterproof and dustproof. After the flood water into the washer set screws, drill the lock into the purlins, to complete the work fixed lighting board. 6. Ming source lighting tile without overlaps within 12m over 12m require lap, lap length of 200 - 400mm, lap sealant applied two lateral take gum without the income side, the vertical color plate Lap need kanban type, ordinary steel sheeting, generally do not test virtual income side, directly to the color plates fixed with self-tapping screws, and applying the sealed plastic, you need to do to close bite plate edges. 7. Mingyuan lighting tile construction, prohibited direct step foot on the crest, so lighting board cracking. Lighting board must be in the lateral position, and place a 1200mmx300mm {length x width) skid planks, foot hole lighting board for guiding and fixing screws from working on it. www.cz-my.com