Hebei Langfang polyurethane foam plant sales hydraulic platform

1, the flange adapter motion systems: foam ends platform to promote each cylinder flange plate a push by the support wheels and the guide rod with the positioning to make the movement smooth. Push the board is formed with grooves can be installed for each type of foam flange (aperture) and the flange is located in the center of the push plate against the force tilt. Installation push plate guide rod and cylinder base plate by the vertical sides of the guide groove positioned for the replacement of different specifications of the workpiece is to adjust the amount of push plate center height adjustment wire just interconnected by a chain around adjustment to ensure synchronization. (The hand wheel for load adjustment, should be adjusted so that the board is close to the screw push the hand wheel position) adjustment of the push plate flange concentric work and work and adjust the support wheel to push the plate holding the vertical state to reduce motion resistance. 2, table: Table of steel and shaped steel welded structure, divided into about two, high strength and rigidity. Adjustable positioned at each end of two blocks to the horizontal adjustment of the push plate flange concentric. The bottom of the table there is a change countertops inclination lifting mechanism to tilt. Foam angle adjustment (eg take more than 5 ° tilt adjustment can dig a pit in the recliner pivot end)