Shandong ceramic fiber / aluminum silicate fiber

Category temperature: general type aluminum silicate fiber 1100 ℃ standard fiber 1260 ℃ high purity aluminum silicate fiber 1260 ℃ high aluminum type aluminum silicate fiber 1360 ℃ zirconium aluminum silicate fiber 1360 ℃ zirconium-containing silicon acid aluminum fiber 1430 ℃ Operating temperature: Depends on the material conditions, heat source type and environmental conditions of the atmosphere manufacturing process: a variety of aluminum silicate fiber, using the corresponding ordinary type, standard, high-purity type, high aluminum type, containing zirconium aluminum silicate fiber cotton as raw material, purified by vacuum forming or drying method process is dried and machined from aluminum silicate fiber in addition to a variety of bulk aluminum silicate fiber cotton corresponding to the excellent performance, the product hard, toughness and excellent strength, has excellent resistance to wind erosion. Heating not inflated, light, construction convenient, can be cut bending furnace is an ideal energy-saving materials, pipes and other insulation equipment. Technical performance: low thermal conductivity, low heat capacity Excellent thermal stability and thermal shock resistance, high compressive strength and good toughness Applications: Industrial furnace wall lining, masonry insulation layer of high-temperature furnace kiln liner, kiln cars, door baffles, kiln furnace partition plate heat or hot instrument insulation, thermal insulation aerospace, shipbuilding insulation, fire protection, sound insulation project name standard common type of high-purity aluminum zirconium type type type high alumina-containing zirconium-type Working temperature (℃) ≤1000 1050 1100 1200 1200 1350 Classification Temperature (℃) 1100 1260 1260 1360 1360 1430 Volume density kg / m3 260 320 260 320 260 320 260 320 260 320 260 320 permanent linear shrinkage (%) (holding 24 hours bulk density of 320 kg / m3 -4 (1000 ℃) -3 (1000 ℃) -3 (1000 ℃) -3 (1000 ℃) -3 (1000 ℃) -3 (1000 ℃) at each hot surface temperature thermal conductivity (w / mk) bulk density of 285 kg / m3 0.085 (400 ℃) 0.132 (800 ℃) 0.180 (1000 ℃) 0.085 (400 ℃) 0.132 (800 ℃) 0.180 (1000 ℃) 0.085 (400 ℃) 0.132 (800 ℃ ) 0.180 (1000 ℃) 0.085 (400 ℃) 0.132 (800 ℃) 0.180 (1000 ℃) 0.085 (400 ℃) 0.132 (800 ℃) 0.180 (1000 ℃) 0.085 (400 ℃) 0.132 (800 ℃) 0.180 (1000 ℃ ) Tensile strength MPa (bulk density of 128kg / m3) 0.5 0.5 0.5 0.5 0.5 0.5 Dimensions (mm) Common specifications 600 × 400 × 10-5; 900 × 600 × 20-50 make other specifications according to user requirements