Longyan rigid plastic material mill grinder factory direct price

Longyan plastic grinder price | rigid plastic materials factory direct grinder Profile grinder; each part 1, the motor, reducer, hydraulic couplings, nose, tail and other couplings must be complete, in good condition, fastening. Reducer, hydraulic shaft section should no oil leakage, oil spills, oil should be appropriate. 2, the signal must be sensitive and reliable, no signal is allowed to boot. To ensure good spray sprinklers. 3, the power cable, the wire must hang neatly, no squeezed phenomenon; 4, the head near the coal, waste rock, debris and the motor, reducer clean coal dust must be cleaned; 5. Face scraper conveyor head and loader lap to the right tail; 6, moderate critical scraper chain plate, scraper and fastening screws must be complete; 7, loader trolley must be stable and reliable; 8, the next loader bridge some cases boot, Ministries primary operation should be no abnormal sound, scraper, chains, connecting ring should be no twist scratch, twist twist, bending; 9, mill, pulverizer at the roadway must be intact and firmly. 10, a safety net and protection grinder, does not fail to ensure that no deformation, safe and reliable; 11, loader, grinder at the roadway must be intact and firmly. Plastic grinder Caution: 1. Power switch is turned on; 2, hand press jog button to test run the machine; 3, starting, idling 1 to 2 weeks; 4, reproduced, shredders joint operation; 5, check without exception, the start-up signal. 6, the operation of machinery and electric motor to no vibration, sound and humidity to normal, each bearing temperature does not exceed 75 ℃, motor temperature must not exceed the nameplate. 7, loader chain tension must be consistent, at full load, the amount of chain tension does not allow more than two chain link lengths, without card chain, jump chain phenomenon. 8, loader United swivel fusible plug or after deep-fried slices easily damaged, can not be replaced with wood or other materials. 9, to protect network security devices grinder should be kept intact, during operation should always check if any damage should immediately stop processing. 10, tail protection and other safety devices must ensure the integrity of the loader. Plastic grinder Advantages / Benefits: save time: within 30 seconds immediately recovered, without waiting centralized crushed and really clean, clean; improve quality: outlet material in high temperature oxidation removal would suffer, wet (moisture absorbing) and physical damage immediate recovery within 30 seconds to reduce physical strength, reduce color glossy destroy Save money: short-term recovery, prevent pollution, caused by poor mixing ratio, can reduce waste plastics, labor, management, storage, purchase of materials funds and loss; versatile: suitable for crushing and recycling PU, PVC, PC, ABC and other soft and hard materials intake materials; easy: easy to dismantle design, change color refueling easy one, compact little space, a small shop next to the machines for use ; with medium-speed motor, low noise, low power consumption; motor with overload protection device, and a power supply interlock protection system, safe and reliable operation and cleaning; can be equipped with optional accessories (1 with double stainless steel machine bucket). Service: One year warranty and lifetime maintenance welcome your call! ! !