Tongan Tongan bundled package with a price packing tape sealing packing tape factory direct price Xiamen

 Xiamen packaged with automatic strapping factory direct price best telephone; 0592-7260569 phone; 13860108685 Specializing in Xiamen packing tape - packing tape Jimei - Tongan packing tape - packing tape Xinglin - Guankou packing tape - packing tape Xiang'an - maxiang packing tape - packing tape Yasmin - Haicang strapping - strapping Daejeon - Dehua strapping - strapping Anxi - Southampton strapping - strapping Zhangzhou - Longyan packing tape - packing tape xinxu - Putian packing tape - Xianyou pack After contact with works ◆ packer packing tape is inserted, the machine can automatically complete the cohesive zone, heat, cut and process the strapping band; and there's automatic shutdown function; packer is to use packing tape wrapped around the product or packaging , and then tighten the two ends are connected by melting or thermal effects and other materials using a machine covered buttons, which work fast, efficient, time-saving, high-quality strapping. Ensure that packages in transport, storage is not due to binding is not strong and scattered, while also bundling tidy. ◆ baler features a separate slide up and down (as opposed to in-one, the failure rate has dropped to 60%) 2, split the take-up reel (a take-up reel pulley group and the group is separate, intuitive, relatively integrated, failure rate has dropped to 60%) 3, the cutter more scientific: V-type notch, better, longer life 4, redeployment of elastic means, avoid elastic force into contact with the movement of manpower adjustment injury event occurs ◆ automatic packer use and maintenance 1, must be checked before starting the packer assembly is intact. Each member of screws, nuts is loose, there should be tightened. If you are missing a small nail capping, maintenance personnel must be notified in a timely manner for processing. 2. Check the belt inside track whether the debris blockage, if must be removed using compressed air to blow dust off the rails inside. 3. Check whether the knife set and slide part in oil, if the lack of required dipped drip method refueling, with a stick dipped in oil, slowly drops in the above manner can not be used to flow down the conveyor belt track, packing belt will slip. 4, the boot process if there are unusual phenomena, such as sound, vibration, and have a smell, if they can not be found, should be shut down notify maintenance personnel to deal with, so as to avoid damage to components.