JA19 pneumatic packer, PET plastic metal band dedicated pneumatic packer, high strength, long ..

JA19 pneumatic packer is a supporting PET plastic strapping tool with packaging, using pneumatic motor drive, through the overlapping of PET plastic steel belt friction melt, PET packaged with the weld interface. Pneumatic packer has a low failure rate, a key operation, continuous operation ability, etc., especially for heavy packaged goods, such as aluminum ingots, glass, cotton, steel and timber. JA19 pneumatic packer is a friction welding baler, packaged with overlapping thermoplastic binding motion by the heat generated by friction, so called "friction welding." Its principle is to use compressed air cylinder piston depressed, the upper piston and pin vibrator is linked together, overlapping portions of the vibrator pressed packing tape. Vibrator has an oval-shaped hole, the hole and the air motor is connected to the eccentric shaft, the air motor rotation speed, which makes rapid back and forth movement of the vibrator. The lower part is packaged with the bottom mold fixed triangular teeth, the upper triangular teeth driven by the vibrator, intense friction. Thus, packaged with the overlapped portions of overheating welding, when the shock set-timer in the end time, welding ends. Upper and lower portions of the foil at the same time squeezing cement, standing a few seconds to make sure welding place is cool. JA19 pneumatic packer advantages: 1) Japan imported, high-precision manufacturing. 2) air motor drive, small noise, very low failure rate. 3) pneumatic tightening, welding adhesive, with cutting in one operation. 4) Using gas source, no power, safe operation, continuous operation ability. 5) Light Weight, easy to carry, when using a portable or flying operations. 6) tightening force, especially for heavy goods packaging, such as aluminum ingots, glass, cotton, steel and so on.