Fiber cement pressure plate prices

Fiber cement board Category 1, according to points where fibers: Asbestos fibers are currently used in most of the country from the reinforcement, the fiber cement board on called chrysotile fiber cement flat; the other is non-asbestos fibers, pulp, wood chips, glass fiber to replace asbestos fibers from the enhancement are collectively referred to as non-asbestos fiber cement plates. 2, according to the density of points: density 0.9-1.2g / cm3, medium density 1.2-1.5g / cm3 high density 1.5-2.0g / cm3 density is generally used for low-grade building walls and other parts of the ceiling, the density is generally used. in the mid-range of building walls ceiling, highly dense generally used for high-grade steel facades of the building, and so on steel floor; fiber cement board our country in accordance with national building industry standards to be divided into two categories. High-density fiber cement board drawback is easily deformed, low-density product deformation coefficient should be smaller. 3, according to the pressure point: whether the platen and the pressure plates of the points. Low density fiber cement board are no clips, high-density pressure plate. Pressure plate, also known as fiber cement pressure plate, the need for specialized press production, can not do without the press of business. According to the density level, fiber cement pressure plate is divided into: 1) general board, density 1.5-1.75g ??/ cm3; 2) excellent board, density 1.75-1.95g / cm3; 3) Premium board, density 1.95g / cm3 or more . 4, according to the thickness of points: 1) the thin plate, 2.5-3.5mm; 2) regular board, 4-12mm; 3) slab, 13-30mm; 4) thick plate, 31-100mm. Usually manufacturers do not thin plate and thick plate, which is the industry an important basis for a measure in the production capacity and the technical level. National industry standard: JC / T412.1-2006 non-asbestos fiber cement flat, JC / T412.2-2006 chrysotile fiber cement plates.