Fire Training Tower

King County Czech Republic Tower Co. in microwave tower communications tower lightning decorative tower wind tower radio tower bionic tower training tower watchtower increased production and sales of chimney tower of the main frame. Fire training tower design principles: fire brigade training tower design principles: conducive duty combat readiness, the officers and training to improve the team combat, defense modernization and to adapt to people's lives and property needs. Training tower design purposes: scientific and practical. Fire training tower editing fire training tower design purpose of this paragraph: Fire Station Building Design Standards "GNJ1--81" of Chapter VI of the fire training tower construction requirements and production standards should be set up training tower attached to the inner section 6.0.1 shall firehouse, which positive shall be provided not less than 35 meters in length runway. Training tower should meet the following requirements: a training tower should be located at the far end of the training ground near the site reserved for the runway, the tower 1.5 meters of sand pit before reservation. Second, the training tower floors should be at least four, more high-rise buildings of the city, the number of layers may be increased. Third, the training tower at least two front windows on each floor, between the windows, according to (Wall) width of 1.0 meters. Fourth, the training tower window size of 1.2 m × 1.8 m from the tower side window shall not be less than 0.65 meters, 0.35 meters wide windowsill, sill plate thickness 0.05 (projecting tower wall 5 cm), each sill height from the ground floor 0.8 m, the height of 3.5 m, and shall be provided with clear width of not less than 0.7 meters of internal staircase handrail tube diameter of not less than 0.026 m. Fifth, the inside of each tower in training should be set not less than 1.5 meters wide platform, the top floor should be set. Sixth, it should set the outdoor fire training tower ladder. Fire ladders shall pass to the top of, and should set off at 2.3 meters from the ground, not less than 50 cm width. Training Tower: 1, mainly by (1) Analog window, (2) floor partitions, (3) skeleton, (4) observation, command platform for backbone and main steel frame and other components. In the front part of the tower with a mock window (customized according to needs several layers window), in the last, with a floor plate (steel plate) between the lower adjacent mock window. 2, at the bottom rear of the tower body is provided with an analog corresponding rear window frame. 3, simulation window and floor spacer and body frame after frame and bolted to each other as a whole. 4, are safe staircase connecting between the layers. 5, the upper part of the tower is equipped with observation, command platform. Seven training tower is generally treated with preservatives to paint, the color is dark green. Or camouflage and galvanized. Eight steel fire training tower function, with removable, can be installed, is not limited by geography, topography, land, materials used assembly parts, low construction cost, high recovery features, great savings funds for the troops training to achieve a multiplier effect. Welcome to the fire units to order the company fire training tower.