EPS-5KW Theo root single corresponding emergency lighting Emergency power supply

SIGAD series single-phase EPS technical parameters input capacity (KW) 0.5 1.0 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 Maximum current (A) 3 7 13 20 25 30 35 16 20 25 28 30 Voltage (V) single-phase 220V ± 25% of the three-phase 380V ± 25% or single-phase 220V ± 25% Frequency (Hz) 50Hz ± 5% rated output current (A) 2.2 4.5 6.8 9.1 13.6 18.1 22.7 27.2 32 36.4 41 45 Voltage (V) normal: with mains When the voltage consistent emergency: 220V ± 5% when emergency: 220V ± 5% single-phase three-way frequency (Hz) an emergency: 50Hz ± 0.5% Normal: agreed to switch with the mains voltage is less than 0.25 seconds (special requirements may be less than can work without noise when the noise still there is electricity mains consistent with emergency power supply for 90 minutes (standard) Overload capacity 120% load at <55dB (when the emergency power supply) Relative humidity: 0.01 seconds) Emergency waveform: sine wave normal 0-90% Ambient temperature -24 ℃ ~ 40 ℃ altitude of 2000 meters adapt to the load type is mainly used for lighting and other load weight (kg) 60 130 180 210 360 410 510 620 700 780 850 940 output circuit (standard) 333333333333 · Overview of the company's intelligent emergency power supply (EPS) system consists of a rectifier, static switch module / manual bypass switch, a control unit and inverter racks, battery group, of which the inverter is the core. The role of the AC rectifier is converted into direct current, to achieve the power to the battery charger and inverter module; inverter direct current into alternating current action sucked, stable and sustainable supply of electricity load equipment; static switch can set the system to work in or online backup in two ways, and adjust the output of the inverter and mains synchronized, ensure that the load between the mains and the inverter output is switched smoothly. Manual bypass switch can transfer the load to the mains and isolated from the system, so that when the system does not impede the normal maintenance work load equipment.