LEDT10 lamp

LED lamp (Intelligent dimming sound and light control) Infrared, Voice Tube Product description: ???? (a) advantages compared with conventional fluorescent ???? 1 saving - saving 75-80% ???. ? 2 environmental protection - no ultraviolet light, infrared light and other radiation, and can avoid the overflow of mercury in fluorescent tubes rupture secondary pollution, waste tube is recyclable. 3. longevity - more than 50,000 hours without maintenance ???? 4 - saving manpower and maintenance costs. ??? 5. Convenient transportation --PC pipe, vibration resistant, easy to transport. 6. The use of intelligent control (sound and light control, infrared) mode, energy-saving effect is more obvious, rational design, implementation and control lamp integrated, fine workmanship, can directly replace the conventional fluorescent lamps (for garages, corridors and other places) LED intelligent dimming fluorescent tubes energy consumption is only 1/10 of incandescent lamp, energy-saving lamps 1/4, energy-saving rate than ordinary fluorescent up to 90%, life of more than 50,000 hours, is 10 times more than ordinary lamp, maintenance-free, there should always replace the lamp, ballast, starter problems, using the easiest way to change the lamp , the installation will replace the original LED fluorescent lamp removed, and remove ballast and starter, let 220V AC power can be directly applied to both ends of the LED lamp. My company specializes in the development of this LED intelligent dimming fluorescent lamp, when it does not shine bright, matt silent when it has 2W power of micro-light (which can be taken to meet the monitor), and when the sound will reach the design standard brightness ( T8 fluorescent tube light intensity equivalent to 40W). User-friendly design, can meet the lighting requirements of parking, but also greatly reduce the cost of electricity. 1 ,? infrared LED fluorescent tube uses light-sensitive technology: Under sunny conditions lamp will not light, to achieve the purpose of saving; 2 ,? uses infrared thermal technology: In the dim light of the situation, if someone in the infrared sensor area, light will automatically light up, the purpose of lighting; 3 ,? adopt LED as light source: AC165-265V can be used within the voltage range, and life can reach more than 80,000 hours, to green long life. . This lamp is available in the hallway, corridor, bathroom, basement, garage, streets, alleys and other places, automatic lighting .. 7. There are T5, T8, T10 LED fluorescent tubes and other full range of products. Power: 8W, 10W, 14W, 16W, 18W, 20W, (optional) Dimensions: 300mm / 600mm / 900mm / 1200mm / 1500mm / 2400mm (optional) Flux: 1390Lm-1480Lm (optional) PC cover: Stripe , white, transparent (many types optional) LED Specifications: High brightness SMD / 3528; 3.0-3.4V, 20mALED single chip brightness: ≥6.5Lm (corporate standards, customizable 6.5-9Lm chip) power factor: ≥0.95LED Luminous flux: ≥85Lm / W Correlated Color Temperature (CCT): White: 5000 ~ 5500K Warm: 3000 ~ 3500K Cool White: 6000 ~ 6500K color rendering index (CRI): white Ra≥70 \ 75, the average beam warm Ra≥60 angle: 130 degrees Operating temperature: -5-45 degrees Humidity: 10-70% RH Light body and lampshade material: Aluminum PC aluminum plate PCB 8. Widely used in hotels, conference rooms, factories, offices, business clubs, homes, public buildings, underground garages, supermarkets, refrigeration showcases, schools, hospitals and other places. 9. The company's other products LED lamp, LED spotlights, LED ceiling light, LED panel lights, LED bulb, LED flood light, LED lights, indoor HD LED display, full-color LED displays and other products. (B) Comparative advantage with LED fluorescent tubes on the market ???? 1. The LED light source into strips divergent light, the brightness increase 4-5 times. (Advantage: due to increased brightness, you can minimize the use of LED, in order to reduce the current, lower heat) ????? 2 the light fades from 5% / 1000 hours reduced to 0% / 3000 hours. (Low current, negligible heat, protecting the LED) ????? 3. There is no spot. (LED on the market because it is regularly arranged, so there will be a gap between the point light source emits light, so that within a certain distance produces spot; and I produced the LED fluorescent tube, since the light source through a special process of physical treatment, into strips divergent light, so the light emitted becomes staggered shape, spot solve the problem, a unique selling point and this is my product) ????? 4. material for transport. LED fluorescent tube on the market more transparent glass, so you can increase the brightness, but the dazzling light and color, not particularly conducive to transport, I produced the LED fluorescent tubes with high-grade PC plastic, light color and soft, easy to transport. ?? ( iii) GB basic dimensions T8-0.6 meters --588 ± 1mm ??(excluding stitch length) T8-0.9 meters --894 ± 1mm ??(capped length) T8-1.2 meters --1198 ± 1mm ??(capped length) T8- 1.5 m --1498 ± 1mm ??(capped length) (iv) by the international certification? CE ---- "CE" mark is a safety certification mark, the manufacturer is considered open and a passport to enter the European market. ?? RoHS ---- European Union regulatory Restriction of Hazardous Substances Directive (ROHS), to the manufacturers sales from July 1, 2006 to remove part of the EU market six toxic substances, China, Japan, the US states also have similar regulations take effect. EU RoHS environmental directive (Unit: ppm) (except for special provisions concerning the terms of a number of products) restricted substances limits ??? FCC ---- Where electronic products entering the United States need to be EMC certification, one of the more common There are three authentication methods: Certification, DoC, Verification