1000W 1000 watt UV lamp UV lamp UV lamp 1KW 1000W UV shadowless

I. Introduction: UL-621T hand-held (1KW) UV ultraviolet lamps imported high-quality made of pure quartz glass tube, ultraviolet ray can penetrate the high level and large, hydroxyl content quartz tubing of 3 or less. Wavelength ultraviolet light generated by each model are 365nm-400nm, and the light intensity is greater than 4mW / cm2, are in line with UV curing UV ultraviolet light irradiation necessary conditions is essential for UV curing UV glue. Second, the product features: 1. The machine easy to use, using split (including power boxes and boxes of two parts), can be arbitrarily fixed place or moved. 2. Work power AC220V, energy saving and low noise. 3. Uses 1 small tube axial fan for cooling. Its advantages are: fast curing, high gloss, the cured product surface adhesion. Third, the application: UL-621T hand-held (1KW) UV ultraviolet lighting professional for a variety of UV coatings, UV inks, UV coatings, UV curing UV glue. Applicable areas: printing plate, flexible color printing, furniture industry, decorative materials, paper coating, automobile and motorcycle plastic parts, printing cans, plastic packaging surface UV ink, UV curable varnish, is also a semiconductor PCB, signs, light such as the above photosensitive solder resist and photosensitive character ink cross-linking curing the ideal source. Fourth, the technical parameters: 1. Model: UL-621T 2. power (220V): 1000 W / single tube 3. band (UV-A): 365-420nm 4. tube length (mm): 300mm standard / domestic, or customized 5. Effective lifetime (H): 800 6. light intensity (3-5CM): 80-120w / cm 7. Radiation distance: 80-350mm 8. Working width: adjustable light level to solve 9. Cooling Method: 38W miniature axial fan air-cooled exhaust 10. box size: L350 × W170 × H290mm (length × width × height) can be ordered 11. Power box size: L360 × W170 × H250mm (length × width × height) can be set System 12. Weight: 22kg V. methods of operation: 1. Turn on the power indicator lights normal; the work can be carried out after 2. Start the fan power switch for 2-3 minutes 3. After work, turn off the lights switch, delay 3-5 minutes until the lamp cooling fan can be turned off. VI Notes: 1. Operators and ultraviolet lamps surrounding area staff within two meters, when the device is working, the staff must be equipped with anti-UV glasses, wear long sleeves, rubber gloves packed, non-direct exposure to ultraviolet light skin, Avoid long-term suffering from skin diseases; 2. box when not in use into the right place, to prevent a hard object hitting the lamp to avoid damage to the lamp; 3. box when in use, but also to prevent a hard object hitting the lamp. At this box high temperature, to prevent burns; 4. The light source is in use, the power control enclosure must not be opened, to prevent electric shock; 5. The suction fan does not rotate when found, do not open, to prevent overheating and damage to the lamp and Other parts; 6. equipment display area non-place flammable items; 7. lamp life of 800 hours, the need for timely replacement of the active life of the post, or directly affect the results; 8. If you need to move the UV light source use position, you should turn off the UV lamp and power supply, and then moved to a new location in order to open;