Dongguan Kai Union 3000-1 stainless steel passivation solution manufacturers

Stainless steel passivation solution (ID3000-1) Introduction This product is widely adapted to austenite (SUS300) stainless steel, martensitic (SUS200) stainless steel passivation solution is to upgrade products, inactivated faster, corrosion resistance ratio General passivation solution stronger, colorless and tasteless at room temperature can be used without any special environmental requirements, which do not contain heavy metals and other hazardous substances, environmentally safe, certified by SGS reached ROHS standards of today's society, the passivation process does not change the original size of the workpiece, the size, but also to maintain the original color and properties of the workpiece, we only just improve corrosion resistance of the workpiece, the stainless steel surface reactive chemical by micro-chemical reaction is converted into inert stainless steel surface The chemical nature, simple immersion to Adaptation: screws, small furniture, food machinery, chemical machinery, digital electrical components, communications equipment and other ...... elect to use 1. passivating product, the surface of the workpiece degreasing clean 2. Select a good container, the solution was poured into a container, passivation (soak 8-15 minutes) 3. Remove after rinsing with water (1-3 times) 4. pH neutralization processing, use, or 5% sodium hydroxide lye, more effective removal of impurities 5. passivation brought in and taken out after rinse clean the workpiece, the workpiece 6. clean the impurities brought the already clean good piece drying or drying and then packaging