LED fountain lights 24W colorful buried towards the public fountain lights manufacturer LED Landscape

Product Name: Focus towards - Colorful buried LED fountain lights -24W-A product Model: ZC-MDPQ-C-24W-A 24W LED Fountain Light Colorful specific parameters Material: Die-cast aluminum Environmental ADC-12; 304 stainless steel top cover and screws, glass imports ABS buried jacket, inner potting process. Source: Mitsuhiro number of light sources: eight input current: constant current 320mA * 3-way power: 8 * 3W Color: RGB Beam angle: 30/45/60 degrees optional Working temperature: -40 ℃ - 60 ℃ Lamp Size: D185 * H66MM Package Size: 205 * 205 * 80MM protection: IP68 controller: External DMX512 decoder Weight: 1.2 KG under pressure: 2500KG Warranty: 3 years LED Fountain Light LED Fountain Light installation instructions led technology is the use of making the production of underwater lights. Compared to the traditional terms of underwater lights, LED underwater lights more environmentally friendly, and light changing and diverse, more decorative, is widely used in a variety of landscape lighting systems. But as led lighting manufacturers, LED underwater lights for installation in some issues that need special attention. 1, LED underwater lamp should adopt DC constant current power supply. In the constant power control, LED fountain lights, LED wall washer, LED flood light, LED underwater lights, LED buried lights of the forward voltage drop as the temperature increases led chip becomes smaller, this situation For LED underwater lights and not much impact. But if the constant drive will then cause the chip LED underwater lights with the temperature increasing in the current circumstances, when serious and may even burn LED underwater lights. Therefore, LED underwater lights should be used DC constant current power supply. 2. Need to make anti-static measures. LED fountain lights products during processing to be used in the installation of certain anti-static measures, such as: bench to ground, the workers wear anti-static clothing, with anti-static ring, as well as with anti-static gloves, conditions can be installed Anti-static ion fan, but also to ensure the installation of air humidity around 65%, in order to avoid the air too dry to generate static electricity. In addition, the different quality LED antistatic ability are not the same, the quality of high-grade LED fountain light anti-static ability. 3, pay attention to the sealing of LED products. No matter what kind of led lighting products, when applied to outdoor, are faced with moisture, sealing problems, LED Fountain Light is especially true. Sealing problems were not dealt directly affect the life of LED fountain lights products. III. Installation instructions first LED Fountain Light firmly fixed. 2. Connect the lead reliable connection. 3. Verify that the installation is correct, no electrical short circuit. Unused connectors with waterproof tape. Then access the appropriate transformer. 4. You can choose to install a large number of underwater lights branch of power at all, considering the current load and power drop cable for each branch, and the choice of the appropriate size cross-section and cable length. 5. If a problem occurs during installation, please consult our technical staff. Fourth, note: 1. qualifying Description: When the internal control, ①2 core male and female connection, male connector as the input, female connector as an output. ②2 core cable, with a corresponding color cable is connected and the connection is reliable no bad phenomenon. (Brown wire connected to the positive, the blue wire to negative) 2. Lamp body can be grouped to provide power, the power feeder multi-strand copper cross-section 4.0mm2 or more. V. Notes: 1. Note that the shock during installation and transport. 2. Ensure that the installation location before installation can withstand 10 times the weight of the product. Installed in no vibration no swing, no fire hazards flat place. 3. The power supply is consistent with the product label use. 4. There are sophisticated devices, do not dismantle. 5. In case of failure, the company returned to service.