Ocean King Ocean King NSE9720 spot price NSE9720

Ocean King Ocean King NSE9720 NSE9720 spot prices I. General to meet the railway tunnel, roads and bridges, public venues and various production companies and other anti-glare lighting, the latest research and development and production of NSE9720 type emergency glare through street, widely used in tunnel roads, bridges, large-scale facilities, plant, the station and other places for road, channel flood lighting. II. Features NSE9720 Ocean King Ocean King NSE9720 spot price design and selection of protection angle mirror coating technology to achieve the glare effect, can effectively reduce the operation, construction workers eye irritation. Avoid discomfort and fatigue. Gas discharge light source of choice. High efficiency, long life, power factor greater than 0.9, good light transmission, long life of 10,000 hours. Special surface coating and sealing process, to ensure that lighting in the humid, high temperature corrosion and other harsh environments never, never rust. Multiple shock structure design and high-strength alloy casing, to ensure long-term security shock tracks in the roadbed, bridges, tunnels and other high frequency. A variety of installation pedestal, ceiling and wall-mounted, light angle can require up and down within a range with 180 ° adjustment depending on the environment. (Where power is 70W to install remote control relays, can be multi-channel control, mainly used in railway, highway tunnel.) Electronic, mechanical double protection device, automatic power cut after opening. Maintenance more secure. Wide use of the regulator, constant power technology and special circuit design. A type in the main electrical power can immediately start emergency lighting, it can also be controlled during main power outage started at any time via an external switch; B type purely as normal emergency lighting is turned off; D model can be used as a normal task lighting, but also has emergency Functional three main technical parameters of Ocean King Ocean King NSE9720 spot price NSE9720 rated power:. W70W / 35W rated input voltage: VAC220V50Hz Frequency: Hz50 Emergency Input voltage: VDC12 ~ 16 light source (MH gas discharge lamp): Rated power: W35 / 70W Luminous flux: Im2600 / 5200 average life: h15000 emergency lighting time: min90 / 45 Dimensions: Lighting: 340 * 270 * 193mm emergency kits: 210 * 180 * 123mm Weight: Lamps: 5.1Kg emergency kits:. 4.2Kg IV use Ocean King Ocean King NSE9720 NSE9720 1 spot prices, according to the site environment and lighting needs, confirm the lamp and ballast tank installation location and proper installation. 2. In determining the fixture installation location, the lamp and ballast box fixed. 3, connect the cable, said ballast tank: A, B type input Note: White cable (left) shows the power line 1, red and black connected to 220V power supply 2, brown, blue emergency switch line (two lines shorted) 3, the yellow-green wire is the ground wire A, B Output Note: black cable (right) shows a light line, red, black then the light source 2, the yellow-green wire grounding wire D-type input Note: White cable Line (left) shows a power cord, red, black pick 220V (normal lighting) 2, brown, blue pick 220V (battery charging) 3, the yellow-green wire is the ground wire D-type output Note: White cable (right) Line 1 denotes a light source, red, black then the light source 2, brown, blue emergency switch line (two-line short-circuited) 3, the yellow-green wire is the ground wire 4, replace the lamp, first disconnect the power, unscrew the lamp front the screws on the fixed glass panel, by hanging chain structure, the panel light hanging from the lamp housing, then unscrew the old bulb, put a new lamp. V. Notes 1. Non-professionals are not free to remove lamps. 2. When using, has some light surface temperature is a normal phenomenon; Transparency center temperature is higher, not touch it directly. 3. When changing a light bulb, you should use the same type, the power of light bulbs; if you change the bulb type or power, should replace the corresponding supporting ballast. The warning lamp must be grounded: 1 can not be installed directly on fuel; 2. When disassembly and maintenance of lamps, you must first disconnect the power 3. Do not use in minus 20 degrees below the environment