AEP tonometer

Italy AEP AEP AEP tonometer sensor AEP AEP gauge load cell Shanghai Tang Autumn Trade Co., Ltd. to provide long-term benefits of imported Italian AEP sensors. AEP level switch, AEP sensor FT2-C2-2T etc., TC4-10T. TP12 / BH53 500BAR meter MAN2 / S 500 BAR 4-20mA, transmitter TA4 0-10V, MP2E. Detailed models such as the following: 1. The compression load cell CBS-250kg, CBS-500kg CBS-1t, CBS-2.5t, CBS-5t, CBS-7.5t, CBS-10t, CBS-15t, CBS-20t, CBS -30t, CBS-50t, CBS-75t, CBS-100t C2S-100kg, C2S-250kg, C2S-500kg (C1 / C2 / C3) C2S-1t, C2S-2.5t, C2S-5t, C2S-7.5t, C2S-10t, C2S-20t, C2S-30t, C2S-50t, C2S-75t, C2S-100t (C1 / C2 / C3) 2. tension and compression load cell TCA-1kg, TCA-2kg, TCA-5kg, TCA-10kg, TCA-25kg, TCA-50kg TCE-350kg, TCE-500kg TCE-1t, TCE-2.5t, TCE-5t, TCE-7.5t, TCE-10t, TCE-20t 3. Pull load cell TS: 25kg, 50kg, 100kg, 200kg, 300kg, 500kg, 1t, 2t, 2.5t, 5t, 7.5t (C2 / C3) TSA: 100kg, 200kg, 300kg, 500kg, 1t, 2t, 2.5t (C2 / C3 / C4) T20: 5t, 7.5t, 10t, 15t, 20t (C2 / C3) D100: 20t, 30t, 50t, 75t, 100t 4. bellows load cell F1: 2.5kg, 5kg, 10kg, 20kg, 25kg , 50kg, 100kg, 200kg (C2 / C3) F3: 10kg, 25kg, 50kg, 100kg, 200kg, 500kg, 1t, 105t, 2t (C2 / C3) 5. cantilever beam load cell FT1: 350kg, 500kg, 1t, 2t, 3t, 5t, 7.5t (C2 / C3) FT1A: 500kg, 1t, 2t (C2 / C3) FT2: 500kg, 1t, 2t, 3t, 5t (C2 / C3) FT5: 10kg, 20kg, 50kg, 100kg (C2) 6. Weighing Module UPFT1: 350kg, 500kg, 1t, 2t, 3t, 5t (C2 / C3) UPFT2: 500kg, 1t, 2t (C2 / C3) CFR: 15kg, 25kg, 50kg, 100kg 7. Twist TRX torque sensor from the sensor STATIC force 100, 200, 500 Nm, 1000, 2000 nN, EN 10/14: Classe: 0,05 e 0,1,0.03%, Material: Stainless Steel, LASER welded, EN 60529: IP67 , For dynamic applications, High long term stability, Flange connection. RT2 torque sensor 5, 10 Nm, 25, 50 Nm, 100, 250 Nm, 500 Nm, 0.20% ROTATING torque transducers Output: 2mV / V or 10Vdc Nominal Speed: 4000 rpm Contact transmission LOW COST TRS torque sensor STATIC force 0.5 , 2.5, 5 Nm 10, 25, 50 Nm 100, 250 Nm 500, 1000 Nm 0.20% Material: Stainless Steel BTR indicator STATIC force 0.5, 2.5, 5 Nm 10, 25, 50 Nm 100, 250 Nm 500, 1000 Nm 2000 Nm 0.20% ATC torque sensor 0 - 1000 Nm, 0 - 2000 Nm DTR 0.02% 8. load cell TSTM 0.5, 1, 2.5, 3 kN 0.02% Material: Stainless Steel, Output: 2mV / V TCETM 5, 10 , 25, 50 kN, 75, 100 kN 0.03% Material: Stainless Steel, Output: 2mV / V, LASER welded EN 60529: IP67 C10 10, 25, 50, 100 kN, 250, 400 kN, 0.05% Material: Stainless Steel , Output: 2mV / V, 4-20mA, 0-5V, LASER welded, EN 60529: IP67 TC4 5, 10, 25, 50, 100 kN, 200, 300, 500 kN, 750, 1000 k, 0.05%, Material : Stainless Steel, Output: 2mV / V, LASER welded, EN 60529: IP67 DCVTC4 0.5, 1, 2.5, 5, 10 t, 20, 30, 50, 75, 100 t 0.05%, Material: Stainless Steel, Output: 2mV / V, LASER welded, EN 60529: IP40 DCTC4 0.5, 1, 2.5, 5, 10 t, 20, 30, 50, 75, 100 t, 0.05%, Material: Stainless Steel, Output: 2mV / V, LASER welded EN 60529: IP40 TC8 5, 10, 25, 50, 100 kN, 200, 300, 500 kN, 750, 1000 kN, 0.03, Material: Stainless Steel, Output: 2mV / V, LASER welded EN 60529: IP67, mKAL 50, 100, 200, 500 N, 1, 2, 3, 5 kN, 0.02%, Output: 2mV / V, EN 60529: IP50 KAL 10, 25, 50, 100 kN, 200, 300, 500 kN, 750, 1000 kN , 0.02%, Material: Stainless Steel, Output: 2mV / V, LASER welded EN 60529: IP67 CM 100, 250, 500 kg, 1000, 2500 kg, 0.20%, Material: Stainless Steel, Output: 2mV / V, LASER welded , EN 60529: IP67 C8S 5, 10, 25, 50, 100 kN, 200, 300, 500 kN, 750, 1000 kN, 0.03%, Material: Stainless Steel, Output: 2mV / V, LASER welded EN 60529: IP67