High temperature ceramic ink from the dry

The ink from the dry ceramic high temperature, plain, good adhesion, gasoline resistance, chemical resistance; 2, feel good, good leveling, surface smooth; 3, good surface hardness, high impact resistance, anti-scratch; 4 resistance, gasoline, alcohol-resistant, the degree of chemical resistance good; printing: choose mesh 100-350 mesh, in order to calculate 120T mesh coating covering an area of ??30 to 35 square meters per kilogram. Dry time natural volatile 5-15 minutes, drying time within 24 hours, 48 ??hours after the best performance. 1. With matching special thinner open water 2. With 718 net wash water network. 3. Or add matching hardener 10% increase adhesion, improve ink film hardness. 4. 80 ℃ oven bake 10 minutes Canon better. Test Method (completely dry): 1.3M gummed paper painting hundred grid ink surface angle of 45 degrees to quickly pulled off the oil. Usage: 1. I recommended thinner for dilution is not recommended 783 slow dry diluents, should be fully mixed before use, be kept sealed after use. 2. While stirring the companies supporting open water plus 10-12%, diluted to print suitable viscosity, diluted pad printing thinner; 718 net wash water. 3. Must not be mixed with other types of ink, or prone to other adhesion, chemical reactions and other undesirable phenomena. 4. Add the curing agent ink usage time of 8 hours, expired please abandoned, the remaining ink can not be recycled