Touch screen glass ceramic ink

First, the product description 1, ink use range: Key recommended for use in glass, ceramic products above can also be used in a number of metals, aluminum, aluminum alloys and paint surface. "; 2, ink characteristics: bright ink, the ink evenly, pigment dispersion, and the fineness of all, over the net, leveling good, cured coating with excellent adhesion, coating film has high hardness and good water resistance, weather resistance, oil resistance, solvent resistance, chemical resistance can be screen printing, pad printing may "; 3. Other parameters:.. A. dry conditions: 150 ℃ bake 15 minutes B. Impact: 1 / 2RX1000gX50cm OK; C. pencil hardness: 2H ↑ D. salt spray resistance: 24 hours; E. resistance to boiling water: 2 hours; F. Flexibility: ≤3mm; G over the net performance:. 77T-140T mesh (with gold except, silver, pearl powder formulated ink). 4, thinner choice: A, Thinner: S-3 slow thinner; S-7 dry diluent B, wash water network: S-718A 5, Caution: A, before using the Stir well , promptly closed after use; B, may be needed to add about 10% thinner diluted before use add 13% EP-01 curing agent, placed about 10 minutes, activation and then printed, better leveling surface 111; "; C, contaminated material should be surface or wipe clean with a scouring oil in order to facilitate the printing effect; printing error, should not let it completely dry before removing with 111 hand the word water, re-printing; printing process encountered network After plugging the status board first with S-718A washing network water cleaning and then print; "; D, chromatic needed, should be a chromatic color is dry or hard work after the front; E, adhesion, hardness, acid resistance, oil detecting resistance, scouring oil, scratch resistance, abrasion resistance and other properties, only after detection of ink required to fully cure; F, if the reinforcing agent in the ink, the need to use it up within four hours. 6, emergency measures: A, such as dip splashed eye wash immediately with water, serious medical treatment; B, fire fighting and emergency measures: Use dry powder, foam or sand fire; they must wear masks and gloves C, operator operates.