Plastic Ink PE | PP | AS Acrylic Ink

Contact Laiju Fang 15323364649 QQ512330637 YB-5700 Series Free handle PE ink This product uses advanced imported resin and advanced pigment grinding through a combination of fine system for solving our customers difficult for PE material printing requirements, we developed a special PE-free printing process ink, resolved in the PE material does not require any treatment to direct printing of technical problems to solve difficult problems printing PE material. Technical Reference [1], the scope: Mainly used untreated the PP, PE, OPP, BOPP, PET, PBT, PA nylon, LDPE has been treated of, HDPE and ABS, PVC, PC, PMMA dumb Chris and many other commonly used plastic products, silk screen printing. 2 Features: Bright, high hiding power, good adhesion, especially alcohol-resistant, chemical-resistant, scratch resistant, resistant to gasoline, alcohol, bending resistance and other characteristics. 3, thinner: Division I YB-02 special thinner open oil or anti-Whitewater with a net wash water cleaning screen. 4, printing: use mesh to 200-300 mesh. Dried at room temperature, dry time natural volatile 5-10 minutes, drying time within 24 hours, 48 ??hours after the best performance. [Performance Test] A, 3M tape draw hundred grid test: 3M gummed paper painting hundred grid ink surface angle of 45 degrees to quickly pulled off the oil. B, anti-alcohol test: with cotton wool dipped in alcohol concentration of 99% industrial 500G force level back and forth 500 times without bleaching. [Note] 1, the appearance of a variety of materials similar to, but may be of different materials, the customer should first try to print, after indeed they meet requirements, and then mass production. 2, do the surface of the substrate to remove grease and impurities work to promote adhesion effect. 4, the case without permission, this series of inks and other types of ink may not mix and match colors. 5, inks, thinners please stay away from the fire source, stored. 6, pay attention to good ventilation when using the construction site, try to avoid direct contact with the skin. 7, this product is accidentally splashed entrance, nose, eye, ear, apply plenty of water or direct medical assistance.