Factory direct heatset bronzing bronzing surface oil base oil

Friends of the ink contact Laiju Fang 15323364649 QQ512330637 5400 series two-component metal, glass ink Description Description: This series is a two-component solvent-based inks, chemical polymerization, advanced light ink. Dedicated to printing on all types of metal, glass, ceramics, polyethylene (PE) and the like. Drying methods: solvent evaporation + chemical polymerization drying, 120-150 degree oven, bake for 15-30 minutes heating can dry solids; Mesh: mesh must be solvent, for fine print, can be used 120T-140T network yarn, when printing large areas or for hiding power of printing, optional mesh 100T. Cleaning screen, optional YB-01 wash water network. Viscosity dilution and printing:. A This is a two-component ink series of ink, the ink factory of high viscosity, the printing must be added about 15-20% of the YB-02 open water thinner to printing viscosity. B. When To reduce ink concentration, 5400-100 can add transparent light syrup, its main role is to dilute the pigment concentration is recommended when printing squeegee hardness of 70-75 degrees, after printing is complete and utensils should be cleaned as soon as possible screen . Features: A, two-component ink, prior to printing inks and 5400 Series 5400-901 hardener in weight ratio of 10: 1 or 9: 1 mixed and diluted added YB-02; B, smooth ink, stereoscopic , fitted with water film copy can be printed only Quasi UV effects, good ink resistance to anti-performance, high hardness; C, good adhesion, good acid and alkali resistance and gas properties; D, such as hardening and 5400-901 agent in a weight ratio of 10: 1 or 9: 1 mixed with each other 150 degrees and bake 30 minutes can be resistant to stamping, over a hundred grid test; E, the ink film is only attached to the glass surface, not suitable for long soak in water. Standard Hue ID: hue than standard ink has been marked and described in the YOUGUANG screen printing ink color, and can be mixed with each other and with those of other standard color halftones. Note: 1. Stir well before using it even at 48 hours after the test adhesion 2, this series of inks dilution needs, please contact me, I provide special thinner. 3. The results of this data-oriented Division, for reference, customers need to implement after confirmation experiment, then set appropriate conditions of use.