Supply UV metallic ink

Contact Miss Lai 15323364649 QQ: 512330637 YB-1300 Series UV metallic inks YB-1300 series metallic inks to UV (ultraviolet) curing type high light ink, for all kinds of metal materials with excellent adhesion. Since YB-UV1300 series metal ink has never plugging and fast UV curing characteristics, therefore, it is particularly suitable for printing some fine graphic. Octavia has a full and clear printing effect, and can greatly improve efficiency and save energy. Second, the conventional performance marked: 1, viscosity: 180-280PS Screen: 100-140T (250-350 mesh) Thickness: 12-16UM 2, drying time: UV curing. When using UV curing, with 2000W / CM lights 3-4 support, delivery speed of 2.5-3.5 m / min (1200-1800mj / cm2) 3, color: white, yellow, red, blue, black, green and so on. 4, printability material: copper, aluminum, iron, stainless steel, mirror stainless steel, mirror titanium plates and other porous anodized aluminum, iron phosphate, galvanized iron, nickel, chrome and other surface finishing off a metal such as spray powder thermosetting coating or paint sheet metal, 5, adhesion: resistance, acid, 3M adhesive tape can not afford to pull oil. Cross-hatch leather belt stripped, Hatch spacing 1mm, 100% adhesion. 6, features: one hundred percent after curing ingredients, the board will not dry in the net net, excellent printability and no solvent pollution, curing speed, coating adhesion after UV curing, high hardness, good chemical resistance, water resistance and heat resistance. Three, YB-UV1200 metallic ink printing test results: Test Conditions Results Adhesion: cross-hatch leather belt release, Hatch spacing 1mm. 100% Hardness: Pencil hardness H 45. * 200 g pressure. 2H resistance to alcohol: the alcohol-soaked cotton balls, 300 g pressure wipe 50 times. No abnormal grease resistance: Soak salad oil (at room temperature) in 8 hours. No abnormal Salt water: cotton ball soaked in salt water, 300 g pressure wipe 50 times. No change Note: 1, before use, should stir the ink. Due to the different colors and printed materials slightly different user before volume use, should be adequately tested to confirm 2, this series of inks dilution need, please contact me, I provide special thinner. 3. The results of this data-oriented Division, for reference, customers need to implement after confirmation experiment, then set appropriate conditions of use.