Sales stencil tonometer

Instructions 1. The tonometer tonometer factory before the correction zero, users do not adjust themselves, 2. readout method, this tension readings pointer rotation beginning of the first lap reading is not accurate, the pointer to rotate the second lap reading is correct, (and next to flick tension meter mesh) pull wire tension with another director N / cm, means that the mesh width in centimeters how much pull, (usually Newton or N- KG- expressed in kilograms, 1 kilogram = 9.8 Newton) So Newton showed tonometer is the amount of actual meaning tonometer 3. Attachment: technical parameters of the print job with the screen tension meter to determine the type of print job type screen tension (N / cm ) ultra-high-tension wire mesh circuit boards and high-intensity measurement scale 16-20 mesh multicolor and four-color overprint (machine print) 16-20 mesh ultra-fine precision high-precision multi-layer printed circuit precision poly 25-30 esters network (standard monofilament) multicolor and four-color overprint (fingerprint) 8-12 ordinary polyester mesh (standard monofilament) 1-12 nylon mesh surface smooth object surface roughness different goods 8-12 common objects bear the highest screen The data listed in the table to force the Swiss mid-thick gauze of measurement conditions, specifically the relationship between quality net machine of good quality net machine, mesh can hit most of the tension meter is not broken, (recommended to use this I plant the production of the equipment it) but if you exceed the maximum withstand tension. Mesh easily broken, please refer to withstand the maximum tension adjusting pressure 77T 200 mesh 30 N / cm 7KG / cm 90T 230 mesh 25 N / cm 6.5 KG / cm 10T 250 mesh 23 N / cm 6 KG Net time / cm 120T 300 mesh 21 N / cm 5.7 KG / cm 140T 350 mesh 20 N / cm 5.3 KG / cm 165T 420 mesh 18 N / cm 5 KG / cm or more data to use plant start reference data dragnet time when such other pull Network equipment does not make reference