400W electric stirring dispersing machine

Overview: SDF400 type test multi-dispersing machine is my plant using the new technology of domestic and foreign design of new products, which focus on the mixing, sanding, use of a variety of discrete functions in one, is the best laboratory equipment laboratory personnel. The device uses an electronic Constant high-speed lines, digital direct display shaft speed, and with a dispersion impeller and sanding leaf discs. Laboratory tests can adapt to different needs, and calculated directly from the display of stirring spindle speed, dispersion, relationship line speed sanding blade and the material viscosity and the chemical reaction rate between the correct data for large-scale production. The two main technical parameters: 1. Motor Model: U400 / 80-220 400W 220V 100-8000r / min 2. Adjustment range: stepless Constant speed 100-8000r / min 3. stirred dispersion impeller diameter: ￠ 60mm 4. sanding disc diameter: ￠ 60mm 5. lift travel: 250mm 6. Dimensions: 400 × 450 × 800mm three structures: 1. The machine uses dual-axis Constant lifting system for easy lifting. 2. Using series wound commutator motor, motor speed control through intelligent instrument for the implementation of variable speed motor. Application of digital PID technology, high control precision, digital direct display shaft speed. 3. The dispersion impeller and sanding leaf disc and the shaft is directly connected with screws. The left and right holder fixed to the barrel, the barrel jacketed structure, cooling water, by the use of stainless steel materials processing. IV. Installation (see figure) 1. Two grippers are mounted on the holder, the clamping lever plane upward. 2. The stainless steel cylinder is fixed in the holder, cylinder cover holes coincide with the motor shaft. 3. The five-core plug on the motor and speed controller coupled. (Note notch direction). Five use and maintenance: 1. To use the optional sanding leaf discs or dispersion impeller and shaft fixing. 2. Remove the motor locking bolts, adjust the position of the shaft height of the container, the clamping motor base and container, into the material and cover the container lid. 3. Turn on the power, turn on the power switch, and then adjust the speed to the desired speed. 4. The motor for the series excited commutator motor rotation brushes spark generating, non-explosion proof workshop should not be used. Not to open empty 5. speed is greater than 4000r / min. 6. When the motor brush is less than 10mm, should be replaced. Address: Qingpu District, Shanghai, Xu Road 688 Tel: 021-54932371 Fax: 021-59250377 Hotline: 13524749118,15921986669 mail: shfkeli@163.com bao-zhan@163.com Enterprise QQ: 774968341