Leeport environmental thermosetting bronzing pulp

Usage: bronzing pulp 33T halftone printing on fabric (printed twice, for obvious concavity can print several times more), then bake about 150 ℃ 5-10 minutes, then tipping: 140- 160 ℃, 15-25 seconds, pressure 4kg / cm2 or more (flat iron); 180 ℃, 1 second, the pressure 4kg / cm2 (hot) storage conditions: (1) Temperature 5 ℃ --20 ℃ (3) vertical pendulum release (2) humidity 30-70% (4) Avoid direct sunlight bronzing tips: When tipping the captain warmed to normal temperature, not hot foil paper still on. Its because there are two: 1, the substrate foil paper hot discomfort; 2, stamping temperature is not enough, you can re-heating test, such as the blue emitting hot after the stamping temperature is too high, may be appropriate to cool and then hot. Notes: (1) This product has been tested over the international standard: 30 ℃ warm water and detergent Machine wash 30 minutes does not fade. (2), the proposed stamping 24 hours after the test, the best results. (3), above the relevant technical parameters due to different operating environments vary, customers in the selection of the extensive use of available subject to confirmation after the measure qualified. (4), special colors can be special.