Thermosetting flash gold paste, thermosetting imitation bronzing pulp

Thermosetting flash gold paste, thermosetting imitation bronzing pulp Scope: plastisol ink (PLASTISOL) applies to all kinds of fabric 100% cotton, cotton / polyester blends, polyester, shades of color fabric, denim, etc., where the following two points fabric can be used 1, the ability of 150 ° C; 2, air permeability, can penetrate the ink. Unsuitable substrates such as: plastics, metals, glass, etc. and water-repellent nylon cloth. 2. The thermal ink (PLASTISOL) with the use of heat treatment necessary, when heating the plastic resin to absorb the surrounding solvent and glue together into a film, at 80-120 ° C crosslinking began, called semi-drying or flash drying, the purpose of non-stick version. Completely drying step together at 140-160 ° C temperature is lower, only fully baked, in order to make the ink completely dry plastics! The role of heat treatment is very important, almost more than 90% of the problems are related with the baking. Notes 1. inadequate treatment will affect fastness, washing the ink will come off when the elastic enough to crack easily pulled off. 2. Must be at a suitable temperature, in order to make the ink film is sufficiently formed. 3. Measure the temperature of the ink is baked, rather than the temperature of the device.