Supply pulp dispersant

Pulp dispersant I. Introduction: factory production of pulp dispersants are complex polymers, which can effectively disperse the pulp fibers. Improve pulp and paper evenness flexibility is an important aid tissue production, but the agent is also widely used in fine paper, tissue paper and newsprint bright papermaking, it is copied into the paper can avoid holes, evenness high, feel good, but also can improve the speed papermaking, beating save time, reduce energy consumption, has significant economic benefits. Second, the product of physical and chemical indicators: Appearance: white light yellow light small particles and micro-particles effective content ≥98%, a molecular weight of 15-20 million units. Third, the product performance: 1, using a very small amount of the product to exert its unique pulp dispersion effect can save and improve the exit of 5-10%. So that fines and additional material from the net retention rate of water was reduced. PH4-10 can be used in a wide range of conditions. 2, the product can retain all the pulp softness, without prejudice to add other paper additives, the dispersion effect is not affected by other additives. It can be used to overcome many of the paper's disease, giving the paper peculiar physical properties. Fourth, the amount of: Toilet paper: 0.5-1kg / t, cardboard: 0.2-1 kg / t, cultural paper: 0.1-1 kg / t, newsprint: 0.2-0.4 kg / t. Fifth, use: Dissolve: a non-metallic container, water temperature below 25 ℃, while the drain side of the dispersant slowly spread evenly on the pipe drain port, the dispersant with the water rushed along the container, continuous stirring for 5-10 minutes, stirring after each interval of 30 minutes once, repeated 1-2 times, you can use 1-2 hours later. VI Notes: 1, if improper operation will be more difficult when dissolving soluble suspension floe floating in the water, waiting to be filtered or slowly dissolved before use, does not affect the results. 2, dispersant solution such as when using with less, the effect is not ideal, but instead increase the amount of paste felts and other ills. 3, the use of high chlorine and high hardness of the water may be appropriate to add some soda dissolved, generally 3-7 grams per ton of water, especially when a large amount of the dispersant, mostly of water quality problems, you should adjust the water hardness. Seven, packaging and storage: plastic woven 25kg / bag, carton 15kg / box. The product should be placed in a cool dry place, storage period of 20 months. 8, technical support: Engineer Zhang 13563803298