Papermaking equipment parts prices, supply paper making equipment, accessories, Fu Shun Paper Machinery

Cast iron cylinder main components production and development of the company include: the roll shell, spoiler rods, siphon, cover, manhole covers, bearings, shaft head, steam joints. The heat from the steam dryer drying principle into the joint through a saturated vapor condensation inside the dryer, released so that the dryer temperature rise, thereby heating the coated surface of the roll shell run sheet. Heat is transferred to the paper in the paper and in contact with the dryer surface. Condensed steam generating large amount of heat released after the condensed water, the condensed water by the centrifugal force due to rotation of the cylinder is attached to the inner surface of the dryer, the water ring is formed at a relatively high angular velocity, the obstruction to the heat transfer surface of the dryer, and therefore need siphon will promptly discharge condensate. At lower speeds it will not form a water ring, but there will be water condensation in the dryer splash accumulation. What is the long network? In the fully enclosed hydraulic headbox forming section is adjusted fan pump to adjust the pressure of the pulp slurry feed speed for high-speed machine; air cushion headbox is to adjust air pressure to the governor, and open- High headbox places inside the slurry level height adjustment control, suitable for medium-speed machine; - open compartment headbox is suitable for low speed machine. Forming an endless network of networks, between the breast roll and the couch roll to form a horizontal mesh flat or slightly tilt as pulp dewatering work segment, used to call it network case, which is called long net.