China Foundation double high-temperature hot water circulation retorts

Product Features: 1, the overall structure of the upper and lower cans, the cans of hot water tank, under the tank to the processing tank. 2, the entire sterilization process includes: the tank to heat up, the water, under the tank temperature at the tank insulation, recycling water, a cooling, secondary cooling, the pressure was maintained, etc., all for computer control. 3, heating time is short. Because pumped directly under the tank after preheating tank for sterilization, so the starting point for high temperature, heating time is about 5 minutes. 4, the temperature uniformity. The device has the flow switching device, the switching timing of water, the temperature evenly without dead ends. 5, saving energy. Since the completion of the sterilization under water recycling tank to tank, so the water utilization is high, and because the temperature high starting point, use hot water circulation, so the pot does not substantially scaling, no need to install softened water treatment plant. 6, with four safety devices. Safety valves, proximity switches, cylinder, manual chain. 7, improved alarm system. The equipment failure alarm, complete sterilization alarm, security alarm. 8, Wireless F value test function. It can measure the intensity of heat distribution and sterilization. 9, the main control section of all equipment imported from Japan, the failure rate is very low, and high reliability.