Online paper on environmental protection water-based varnish dumb oil Agent printing supplies chemical materials

Product Name: Online aqueous paper light (dumb) Oil Product Specifications: 25L / barrel Packing: sealed bottled product performance: 1, water-based, environmentally friendly, low odor, non-toxic, safe (non-hazardous) 2, quick-drying , smooth degree, abrasion resistance, excellent brightness 3, high-performance anti-anti-adhesive sheets or wet (hot) 4 sticky sheets efficacy, long color fidelity 5, each parameter type light, matte effect and wear effect of the product with the customer choice 6, after extensive road suitability, film, bronzing use of either method: 1, the coating amount: recommendations 4-6g / m dry conditions: 80-135 ℃ 2, construction methods: on-line polishing 3. Dilution ratio: on-line direct use, offline use of high viscosity at the above ratio of added water and alcohol mixture was diluted Notes: 1, such as accidentally swallowed or gets in the eyes, immediately rinse with water 2, in use, Please keep good ventilation, do not use this product is mixed with other varnish using 3, the product of prolonged exposure to air will cause water evaporation, affect the results, do not use products have been poured back into the original bottle in order to avoid Deteriorating Storage: dark, sealed in dry place at room temperature Production date: See package is valid: the three factors that affect the quality of varnish which a paper: Paper smoothness directly affects the coating quality, smoothness, good non-absorbable of paper good effect; base oil absorbent paper to be playing. 2. Temperature: The ideal temperature glazing should be 20 degrees, prints and coatings should be maintained at this temperature, low temperature, low Varnish activity, an increase in viscosity, leveling and poor adhesion. 3, Ink: varnished surface tension greater than the surface tension of the paper should be good adhesion. Effective 5% lactic acid may be added after mixing; dry too much oil, stored for a long time, at the end of the ink are too large to produce crystallization phenomenon, "pitting", "face" and other failures after oil: 4, ink crystallization solve crystallization phenomenon.