The aqueous laminating adhesive

MZX302 aqueous laminating adhesive; Features: green, laminating fastness large, excellent ink transfer. Ink on coated products are not affected, and difficult to change. It has excellent gloss and transparency, weathering, heat, anti-aging, anti-yellowing. Hot embossing effect [do] ★ Technical parameters: Appearance: milky blue phase emulsion solids: 47% ± 1 Viscosity: 15-17 (Tu 4 # cup, 25 ℃) viscosity can be adjusted according to the requirements of mechanical stability: Qualified ( 3000r / m centrifugal sedimentation or stratification does not appear 10min) freeze-thaw stability: Qualified (-18 ℃ / 48h; 60 ℃ / 48h) PH value: 7.5-8 ★ water-covered plastic Scope: Suitable for BOPP film with the the paper is printed laminated. ★ How to use: 1, clean the glue roll laminating machine and plastic tank. Adjust the temperature of the machine: the heat roller 50 ℃ -90 ℃, bake 50 ℃ -90 ℃. 2, the product of the indicators have been adjusted according to the requirements of coating process, please direct the liquid was poured into plastic tank, adjust the amount of glue started. 3, after the film by hot glue dry after pre-drying, after processing, can be directly laminated paper, two hours after the can. ★ washing: wash with water for at shutdown, dry part with a special cleaning agent. ★ Packing: 50kg / 125kg / plastic barrel ★ Shelf life: 12 months, to avoid heat exposure and freezing. Do not mix with other products, unused product should be sealed.