Supply of high voltage ceramic capacitors 101K10KV environmental protection high voltage ceramic capacitors

 MZC-CT81-10KV-D6-101K The tiles lead type high voltage ceramic capacitors, a US company in late 2011 Chi to market a high-voltage, high-frequency, low-loss capacitors. It is mainly applied to all types of X-ray machines, welding machines, high-voltage transformers, ignition coil, an air purifier, negative ion generator, high voltage power supply, high voltage generator, and other high frequency high voltage equipment. Which high voltage ceramic capacitors working voltage of 10KVDC, our test voltage can reach 20--25KVDC, in 30khz frequency above, it is a very good high-frequency high voltage ceramic capacitors. Which capacitor size, diameter * thickness * pitch, respectively, 6mm * 5mm * 7.5mm, its performance is good for all aspects of ordinary y5t, y5p, y5u material ceramic capacitors, high voltage ceramic capacitors in which loss of 0.01%. This paragraph is used in high-voltage capacitors Y5T ceramic material, Y5T ceramic capacitors in recent years successfully developed a new type of ceramic, ceramic materials are widely used in high-end products, compared to other Class I ceramic dielectric constant, suitable to make capacity large capacitance, which has a higher pressure, the dielectric loss of less than 0.1%, much lower than class II ceramics; insulation resistance greater than 200000MΩ, good frequency characteristics, good temperature coefficient, to withstand a large current, at a temperature of from -25 ℃ to + 85 ℃ when the change capacity +22% / - 33% long life, the service life of more than 10 years. ◆ Note (1) the transport and storage? Avoid transport or storage capacitor at a high temperature or high humidity or rain condition. ? Do not place toxic gases, such as sulfuric acid, hydrochloric acid, nitric acid and the like. ? Avoid touching. (2) during operation? Avoid contact, such as sweat electrolyte. Do not touched with bare hands. ? Avoid too much influence, such as the fall caused. ? Do not weld stud terminals. ? Do not terminal. ? (3) usage when the high voltage ceramic capacitors for high-speed pulse, such as a laser, to ensure that the applied voltage (peak - peak voltage), the capacitor's rated specifications. ? Ensure that the capacitor is not exposed to the radiation chamber or transformer.