Jiangxi 800T round reflux cooling towers

Jiangxi cooling tower manufacturer 800T FRP round reflux cooling towers glass steel cooling tower is to use contact with water and air, to disperse by evaporation on a device or refrigeration and air conditioning industry generated waste heat. The basic principle of work are: dry (low enthalpy) of air through the fan twitching, from the inlet into the cooling tower at the net; saturated vapor partial pressure of the high-temperature water molecules flow of air to the low pressure, heat (High enthalpy) of water from the broadcast tower sprinkled into the water system. When the water droplets and air contact, on the one hand due to the direct heat air and water, on the other hand due to the pressure difference between the surface of the water vapor and air, is evaporated under pressure phenomenon, heat the water that is evaporated away heat transfer, so as to achieve the purpose of cooling it. Work process fiberglass circular cooling tower as an example: hot water through the pump room customize certain pressure through a conduit, throat, larynx song, the center will cycle pressure hose to the cooling tower water system broadcast by the broadcast pipes holes uniformly spraying water on top of the packing; air drying, low Han values ??under the influence of wind turbines into the net from the bottom into the tower, form a water and air when the water flows through the heat exchange surface of the filler, Hot air and high humidity Han values ??from the top out of the cooling water drops into the bottom of the basin, through the outlet pipe flow into the host. Under normal circumstances, the air entering the tower, a dry-bulb temperature of the air humidity, there was a clear difference between the concentration of water molecules and kinetic pressure difference, when the fan is running, the role of the tower between the static pressure of water and air, continue to evaporate water molecules in the air, become water vapor molecules, the remainder of the average kinetic energy of water molecules will be reduced, so that the temperature of the circulating water drops. As can be seen from the above analysis, evaporative cooling and air temperature (dry bulb temperature usually say) lower or higher than the temperature has nothing to do, as long as water molecules can evaporate into the air constantly, the water temperature is reduced. However, water does not endlessly evaporation into the air. When in contact with water the air is not saturated with water molecules constantly evaporate into the air, but when connected to a water vapor saturated air, water molecules evaporate not go out, but in a dynamic equilibrium state. The evaporated amount of water molecules from the air to return equal to the number of water molecules in the water, the water temperature is kept constant. It can be seen, the air in contact with water and dried, and evaporated more easily, it is easy to reduce the temperature. Small round reflux cooling towers Product structural features · Shape beautiful dimensions, low height, light weight, and has an area of ??diversity arrangement. Structural advanced advanced structural design, matching the best soft drinks, hot and cold exchange fully with standards abroad earlier. * Ultra-low noise fan noise is minimal and unique watering muffler technology, noise figure in a peer leader. · Most of the cost compared with similar products, electrical power consumption is low, the tower piping configuration is complete, fast cooling effect, can achieve the desired effect. · Bleach minimal use of efficient water collection system, water drift rate is less than 0.01 ‰, with excellent environmental performance. Reliable and durable high-quality glass fiber corrosion resistance, and durability.