Jiangxi 50T round reflux cooling towers

Jiangxi cooling tower factory outlets 50T is mainly used in air conditioning cooling systems, refrigeration series, injection molding, leather, foam, power generation, steam turbine, aluminum processing, air compressors, industrial water cooling and other fields, the most widely used for air-conditioning cooling, refrigeration plastic chemical industry. FRP cooling towers cooling tower FRP maintain the structure of the cooling tower Cooling tower design meteorological conditions Atmospheric Pressure: P = 99.4 × 103 kPa dry bulb temperature: θ = 31.5 ℃ wet bulb temperature: τ = 28 ℃ (square and common type is 27 ℃) cooling tower design temperature drop parameters 1. Standard: into the tower water temperature 37 ℃, the water temperature is 32 ℃ 2. towers medium temperature: into the tower water temperature 43 ℃, the water temperature is 33 ℃ 3. temperature tower type: into the tower water temperature 60 ℃, the column temperature 35 ℃ 4. Normal: into the tower water temperature 37 ℃, the water temperature is 32 ℃ 5. Large tower towers: tower into the water temperature 42 ℃, the water temperature is 32 ℃ tower industry, so that an apparatus of water cooling. Water is fed to the column, so that heat exchange between water and air or heat, and mass transfer, in order to reduce the temperature of the object. Work process round reflux cooling towers as an example: hot water through the pump room to customize certain pressure through a conduit, throat, larynx song, the center will cycle pressure hose to the cooling tower water system broadcast by the broadcast pipes holes uniformly spraying water on top of the packing; air drying, low Han values ??under the influence of wind turbines into the net from the bottom into the tower, form a water and air when the water flows through the heat exchange surface of the filler, Hot air and high humidity Han values ??from the top out of the cooling water drops into the bottom of the basin, through the outlet pipe flow into the host.